Install Control Cable
Note:
The control cable must always have
slack in it when in the disengaged
position.
Models 38409 & 38414
1.
2.
3.
Route control cable through eyebolt on left side
of snowthrower (Fig. 8).
Hook spring to round hole at end of cable
adjuster (Fig. 9).
Before Starting
Route cable through elongated hole in cable
adjuster. Insert Z fitting on end of cable into 3rd
hole on cable adjuster (Fig. 9).
POTENTIAL HAZARD
4.
Slide spring cover over spring and cable adjuster.
Push spring end through hole at end of spring
cover (Fig. 8).
• In certain conditions gasoline is extremely
flammable and highly explosive.
WHAT CAN HAPPEN
•
A fire or explosion from gasoline can burn
you, others, and cause property damage.
5.
6.
Hook spring into top hole of control bar bracket
(Fig. 8).
HOW TO AVOID THE HAZARD
•
Move control bar back toward handle until slack
in cable is removed. The gap between the control
bar bracket and handle should be approximately
Use a funnel and fill the fuel tank outdoors,
in an open area, when the engine is cold.
Wipe up any gasoline that spills.
1/16”-1/8”.
See insert, Figure 8. If an adjustment
•
Do not fill the fuel tank completely full.
Add gasoline to the fuel tank until the level
is 1/4” to 1/2” (6 mm to 13 mm) below the
bottom of the filler neck. This empty space
in the tank allows gasoline to expand.
Never smoke when handling gasoline, and
stay away from an open flame or where
gasoline fumes may be ignited by a spark.
Store gasoline in an approved container
and keep it out of the reach of children.
Never buy more than a 30-day supply of
gasoline.
is required, refer to Adjusting Control Bar,
page 9.
Note:
The control cable must always have
slack in it when in the disengaged
position.
•
•
•
Install Control Cable
Models 38422, 38424, 38432 & 38437
1.
Route control cable through cable guide on left
side of snowthrower (Fig. 10).
2.
Hook upper end of control cable in rear hole
(hole with arrow) in control bar bracket
(Fig. 10).
Mix Gasoline And Oil (Fig. 11)
Use clean, fresh lead-free gasoline, including
oxygenated or reformulated gasoline, with an octane
rating of 85 or higher. To ensure freshness, purchase
only the quantity of gasoline that can be used in 30
days. Use of lead-free gasoline results in fewer
combustion chamber deposits and longer spark plug
life. Use of premium grade fuel is not necessary or
recommended.
3.
Move control bar back toward handle until slack
in cable is removed. The gap between bottom of
handle and stop on control bar (left hand side on
bottom of handle) should be approximately
1/16”-1/8”.
See insert, Figure 10. If an
adjustment is required, refer to Adjusting
Control Bar, page 9.
EN–6
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38422, Toro 38424, Toro CCR 2500 |
| Model Number | 9900001 - 9999999 |
| Model Year | 1999 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Français |
| Product Name | Toro CCR 3000 Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | CCR 1000/2400/2500, Snowthrower |
| Swath | 20 inch |
| Discharge | Single Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 5 hp |
| Engine Motor Type | 2 Cycle EPA1 |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)