1.
APPROVED OIL—For simplicity and best
engine performance, mix the contents of one
DO NOT USE FUEL ADDITIVES OTHER
THAN THOSE MANUFACTURED FOR
FUEL STABILIZATION DURING
5.2–ounce
bottle of Toro 50:1 Two–Cycle Oil
with two gallons of fresh, unleaded regular
gasoline.
STORAGE SUCH AS TORO’S
STABILIZER/CONDITIONER OR A
SIMILAR PRODUCT. TORO’S
Toro Two–Cycle Oil is specially formulated to
provide superior lubrication, make starting easy,
and prolong engine life. If Toro Two–Cycle Oil
is not available, mix two gallons of gasoline and
STABILIZER/CONDITIONER IS A
PETROLEUM DISTILLATE BASED
CONDITIONER/STABILIZER. TORO
DOES NOT RECOMMEND STABILIZERS
WITH AN ALCOHOL BASE SUCH AS
ETHANOL, METHANOL OR ISOPROPYL.
ADDITIVES SHOULD NOT BE USED TO
TRY TO ENHANCE THE POWER OR
PERFORMANCE OF MACHINE.
5.2
ounces of another high grade two–cycle oil
that has the NMMA or BIA–TCW III
certification printed on the label.
NEVER USE AUTOMOTIVE OIL (i.e. SAE
30,
10W30 etc.), TWO–CYCLE OIL THAT IS
Note:
Do not mix gasoline and oil in the
product fuel tank. Oil that is at room
temperature mixes easier and more
thoroughly than cold oil.
NOT CERTIFIED NMMA/BIA–TCW III, OR
THE WRONG MIX RATIO BECAUSE THE
ENGINE CAN BE DAMAGED, AND IT
WOULD NOT BE COVERED BY THE TORO
WARRANTY.
50:1 GAS/OIL Mixing Chart
2.
Mixing Gasoline and Oil—Pour a half gallon of
gasoline into an approved gasoline container
(preferably plastic, not metal) and add the correct
amount of two–cycle oil. Reinstall cap on
gasoline container and shake the container to
mix oil and gas thoroughly. Remove cap and add
remaining amount of gasoline.
U.S. GALLON
Gasoline
Oil
1
1.5
2
gallon
gallons
gallons
2.6 oz.
3.9 oz.
5.2 oz.
Operation
Toro also recommends that Toro
Stabilizer/Conditioner be used regularly in all
Toro gasoline powered products during operation
and storage seasons. Toro Stabilizer/Conditioner
cleans the engine during operation and prevents
gum–like varnish deposits from forming in the
engine during periods of storage.
Starting/Stopping Engine
(Fig. 12)
1.
CONTROLS—Key switch, primer, recoil starter,
and electric start button are located on the
control panel. The choke is just below the
control panel.
Note:
A fuel stabilizer/conditioner is most
effective when mixed with fresh
gasoline.
2.
3.
Turn key to ON and pull choke out.
IMPORTANT: NEVER USE METHANOL,
GASOLINE CONTAINING METHANOL,
GASOHOL CONTAINING MORE THAN
10% ETHANOL, PREMIUM GASOLINE,
OR WHITE GAS BECAUSE ENGINE
FUEL SYSTEM DAMAGE COULD
RESULT.
Cover hole in center of primer with thumb and
push twice. Additional primes may be necessary
in extremely cold temperatures.
Note:
Choke and primer are usually not
necessary when starting a warm
engine.
EN–7
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38422, Toro 38424, Toro CCR 2500 |
Model Number | 9900001 - 9999999 |
Model Year | 1999 |
Download File |
|
Document Type | Operator's Manual |
Language | English, Français |
Product Name | Toro CCR 3000 Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | CCR 1000/2400/2500, Snowthrower |
Swath | 20 inch |
Discharge | Single Stage |
Engine Manufacturer | Toro |
Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
Engine Motor Model # | R-tek |
Engine Motor Size | 5 hp |
Engine Motor Type | 2 Cycle EPA1 |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)