Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005

11
Operating the Quick Stickt
3.
Check to ensure that the speed selector operates
properly:
Push and hold the blue trigger cap down to use the
Quick Stick to move the discharge chute and the
chute deflector. Release the trigger cap to lock the
discharge chute and chute deflector into position.
If the snowthrower does not move or moves
forward when it is in Position R1, remove the
trunnion from the speed selector lever, turn
the trunnion downward (clockwise) on the
speed control rod, then install the trunnion.
If the snowthrower does not move or moves
rearward when it is in Position 1 (forward),
remove the trunnion from the speed selector
lever, turn the trunnion upward
(counterclockwise) on the speed control rod,
then install the trunnion.
Note: Refer to the relevant steps in Installing the
Traction Control Linkage on page 7.
Note: If the snowthrower moves when the traction
lever is in the released position, check the traction
cable (refer to Checking and Adjusting the Traction
Cable on page 14) or take the snowthrower to an
Authorized Service Dealer for service.
Moving the Discharge Chute
Push and hold the blue trigger cap down and move
the Quick Stick to the left to move the discharge
chute to the left; move the Quick Stick to the  right to
move the discharge chute to the right.
Operating the Auger/
Impeller Drive
1.
To engage the
auger/ impeller
drive, squeeze the
right hand (auger/
impeller) lever to
the handgrip.
2.
To stop the auger and impeller, release the right
hand lever.
Important: When you engage both the auger/impeller
lever and the traction lever, the traction lever locks
the auger/impeller lever down, freeing your right
hand. To release both levers, simply release the left
hand (traction) lever.
3.
If the auger and impeller continue to rotate when
m-6904
m-6904
you release the auger/impeller lever, do not operate
the snowthrower. Check the auger/impeller cable
(refer to Checking and Adjusting the Auger/Impeller
Cable on page 14) and adjust it if necessary.
Otherwise, take the snowthrower to an Authorized
Dealer for service.
If the chute does not move, refer to Adjusting the
Discharge Chute Latch on page 17.
If the chute does not turn as far to the left as  it
does to the right, ensure that the cable is routed
to the inside of the handles. Refer to Installing the
Upper Handle Assembly on page 6.
If the chute does not lock into place when you
release the trigger cap, refer to Adjusting the
Discharge Chute Latch on page 17.
If the auger and impeller  continue to rotate when
you release the auger/impeller lever, you  could
seriously injure yourself or others.
Do not operate the  snowthrower. Take it to an
Authorized Service Dealer for service.
3351-182
Rev A
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, ,
Model Number38611
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOperator's Manual
LanguageEnglish, Finnish
Serial Number250000001 - 250999999
Product NameToro Power Max 726 TE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath26 inch
DischargeTwo Stage
Engine ManufacturerToro
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #R-tek
Engine Motor Size141cc
Engine Motor Type2 Cycle EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 SKU UPC Model
Bill Pozun on Feb 04, 2014.

Need man. Have to replace belts.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website