7
Installing the Traction
Control Linkage
6. Lift up on the speed control rod and insert the
trunnion into the hole in the underside of the speed
selector lever (D) located under the control panel.
Note: If the trunnion does not fit into the hole
when you lift up on the speed control rod, rotate
the trunnion upward or downward on the speed
control rod until it fits into the hole.
1.
Remove the hairpin cotter and washer from the
the lower end of the speed control rod (A) and insert
the lower end of the rod into the lower link arm (B) so
that the bent end of the speed control rod faces
rearward.
7. Secure the trunnion and upper end of the speed
control rod with the outer washer and a hairpin cotter
you previously removed.
Note: To make the installation easier, you can look
down through the opening in the speed
selector (A).
A
B
A
m-6899
2.
with the washer and hairpin cotter that you previously
removed.
Secure the lower end of the speed control rod
3.
Remove the hairpin cotter and the outer washer
(of 3 washers) from the trunnion (A) on the upper end
of the speed control rod.
D B
m-6972
Installing the Chute Control
Rod
A
C
1.
Remove the packaging materials from the Quick
Stick.
2.
Stick so that it is upright and in the center.
From the operating position, rotate the Quick
m-6898a
3.
Press and hold the blue trigger cap down and pull
the lever fully rearward.
Note: To make installation easier, leave the wave
washer (B) and the flat washer (C) on the
trunnion.
Note: The discharge chute and deflector should
face forward. If they do not, press and hold the
blue trigger cap down (but do not move the Quick
Stick), and reach forward and rotate the discharge
chute until it faces directly forward.
4.
5.
Shift the speed selector lever into Position R2.
Rotate the
lower link arm fully
upward
(counterclockwise).
m–6971
3351-182
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38611, Toro 726TE, Toro Power Max |
| Model Number | 38611 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Finnish |
| Serial Number | 250000001 - 250999999 |
| Product Name | Toro Power Max 726 TE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 5.0 out of 5.0 based on 1 product reviews. Need man. Have to replace belts.