3
•
To unclog the discharge chute, stay in the
operating position and release the left hand
(traction) lever. While running the auger/impeller,
push down on the handles to raise the front of the
snowthrower a few inches (centimeters) off the
pavement. Then lift the handles quickly to bump
the front of the snowthrower on the pavement.
Repeat if necessary until a stream of snow comes
out the discharge chute.
approved fuel container. Remove the key from
the ignition switch before storing the
snowthrower.
•
Purchase only genuine Toro replacement parts
and accessories.
Sound Pressure
•
If you cannot unclog the discharge chute by
bumping the front of the snowthrower, stop the
engine, wait for all moving parts to stop, and
use a stick; never use your hand.
This unit has a maximum sound pressure level at the
operator’s ear of 92 dBA, based on measurements of
identical machines per Directive 98/37/EC.
•
•
Do not wear loose-fitting clothing that could get
caught in moving parts.
Sound Power
If a shield, safety device, or decal is damaged,
illegible, or lost, repair or replace it before
beginning operation.
This unit has a guaranteed sound power level of
108 dBA, based on measurements of identical
machines per Directive 2000/14/EC.
•
•
Do not smoke while handling gasoline.
Vibration
Do not touch the engine while it is running or
soon after it has stopped because the engine
may be hot enough to cause a burn.
This unit does not exceed a hand/arm vibration level
2
of 7.0 m/s , based on measurements of identical
•
When storing the snowthrower for more than
machines per Directive 98/37/EC.
30
days, drain the fuel from the fuel tank to
prevent a potential hazard. Store fuel in an
Caution: Improper use may result
in loss of fingers, hands, or feet.
Before Operating
Read and understand the contents of this
manual before operating the snowthrower.
Become familiar with all controls and know
how to stop the engine quickly.
There is a highĆspeed
impeller close to the
opening.
Operator's
Position
m-6936
472
The lowĆspeed auger
has a moving pinch
point close to the
opening.
3351-182
Rev A
Categories | Snow Blower Manuals, Toro Snow Blower |
---|---|
Tags | Toro 38611, Toro 726TE, Toro Power Max |
Model Number | 38611 |
Model Year | 2005 |
Download File |
|
Document Type | Operator's Manual |
Language | English, Finnish |
Serial Number | 250000001 - 250999999 |
Product Name | Toro Power Max 726 TE Snowthrower |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
Product Type | Snowthrower |
Product Series | Snowthrower, Two Stage Power Max |
Swath | 26 inch |
Discharge | Two Stage |
Engine Manufacturer | Toro |
Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
Engine Motor Model # | R-tek |
Engine Motor Size | 141cc |
Engine Motor Type | 2 Cycle EPA2 |
Transmission Speed | 6 Forward/2 Reverse |
Transmission Type | Friction Disc |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5) Lawn and Garden readers have rated Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 5.0 out of 5.0 based on 1 product reviews.
Need man. Have to replace belts.