13
Maintenance
Note: Determine the left and right sides of the machine from the normal operating position.
Recommended Maintenance Schedule
Maintenance Service
Maintenance Procedure
Interval
•
Inspect the traction cable and adjust it if necessary. Refer to Checking and
Adjusting the Traction Cable on page 14.
After the First
Operating Hours
2
•
Inspect the auger/impeller cable and adjust it if necessary. Refer to Checking
and Adjusting the Auger/Impeller Cable on page 14.
•
•
•
•
Check the skids and the scraper and adjust them if necessary. Refer to
Checking and Adjusting the Skids and Scraper on page 13.
Inspect the traction cable and adjust or replace it if necessary. Refer to Checking
and Adjusting the Traction Cable on page 14.
Inspect the auger/impeller cable and adjust or replace it if necessary. Refer to
Checking and Adjusting the Auger/Impeller Cable on page 14.
Inspect the spark plug. Replace and/or gap it if necessary. Refer to Inspecting
and Replacing the Spark Plug on page 16.
Annually
• Check the auger gearbox oil and add oil if necessary. Refer to Checking the
Auger Gearbox Oil Level on page 15.
•
Check the tire pressure and inflate them to the proper pressure. Refer to
Checking the Tire Pressure on page 8.
•
•
Lubricate the hex shaft. Refer to Lubricating the Hex Shaft on page 16.
Remove the fuel and run the engine to dry out the fuel tank and the carburetor at
the end of the snowthrowing season. Refer to Storage on page 18.
•
Have an Authorized Service Dealer inspect and replace the traction drive belt
and/or the auger/impeller drive belt if necessary.
Important: You can find more information about maintaining and servicing your snowthrower at www.Toro.com.
Preparing for Maintenance
2.
Loosen the
nuts that secure
both skids to the
auger sides until
the skids slide up
and down easily.
1.
Move the snowthrower to a level surface.
2.
Stop the engine and wait for all moving parts to
stop.
3.
Remove the ignition key.
4.
After performing the maintenance procedure(s),
insert the ignition key.
1/2
in. (13mm)
minimum
m-6938
Checking and Adjusting the
Skids and Scraper
3. Support the side plates so that they are at least
1/2 inch (13 mm) above a level surface.
4.
Ensure that the scraper is 1/8 inch (3 mm) above
and parallel to a level surface.
Check the skids and the scraper to ensure that the
auger does not contact the paved or gravel surface.
Adjust the skids and the scraper as needed to
compensate for wear.
Note: If the pavement is cracked, rough, or uneven,
adjust the skids to raise the scraper. For gravel
surfaces, raise the scraper to prevent the
snowthrower from picking up rocks.
1.
Check the tire pressure. Refer to Checking the
5.
Move the skids down until they are even with the
Tire Pressure on page 8.
ground.
6.
Firmly tighten the nuts that secure both skids to
the auger sides.
3351-182
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38611, Toro 726TE, Toro Power Max |
| Model Number | 38611 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Finnish |
| Serial Number | 250000001 - 250999999 |
| Product Name | Toro Power Max 726 TE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 5.0 out of 5.0 based on 1 product reviews. Need man. Have to replace belts.