8
4.
Align the flattened back end of the long chute
Checking the Skids and
Scraper
control rod (A) with the flattened front end of the short
rod (B) that extends from the front of the control panel
so that they nest together.
Refer to Checking and Adjusting the Skids and
Scraper on page 13.
Before Operating
m–6973
A
Freewheeling or Using the
Self-propel Drive
B
You can operate the snowthrower with the self-propel
feature engaged or disengaged (freewheeling).
To freewheel, slide the
wheels inward and insert
the axle pins through the
outer axle holes, but not
through the wheel hubs.
m-6969
5.
chute control rod in
this orientation
(you must move it
back to insert it
into the gear) and
insert the front end
of the rod into the
opening in the
Hold the long
m-6902
To self-propel, slide the
wheels outward and
insert the axle pins
back of the chute
gear cover until it
slides into the
through the holes in the
wheel hubs and the
inner axle holes.
chute gear.
m-6902
6.
Align the holes in the nested ends of the rods and
insert 2 carriage bolts through the short rod from the
left side of the snowthrower (as viewed from the
operating position).
Mixing Gasoline and Oil
7.
go through the holes in the short rod and then through
the holes in the long chute control rod.
The 2 carriage bolts (in the loose parts bag) will
Gasoline is extremely flammable and explosive. A
fire or explosion from gasoline can burn you and
others.S
8.
cable clip (A) that
supports the
deflector cable (B)
onto the forward
carriage bolt, and
secure the carriage
bolts with locknuts
from the loose
Insert the
To prevent a static charge from igniting the
gasoline, place the container and/or
B
snowthrower on the ground before filling, not
S
S
S
inFillatvehiclehe tankorouontdoanorsobject.when the engine is
cold.Do noWipet handuple spills.gasoline when smoking or
aroundStore gaansoopenline inflamean aporprsparks.oved fuel container,
out of the reach of children.
A
parts bag.
9.
unlock the Quick Stick.
Press and hold the blue trigger cap down to
10.
the chute and deflector operate smoothly.
Rotate the Quick Stick in a circle to ensure that
This snowthrower uses a 50:1 gasoline-to-oil mixture.
Use Toro 50:1 2-Cycle Oil (Fuel Stabilizer Added)
or an equivalent high-grade, NMMA TCW3-certified
two-cycle oil.
Checking the Tire Pressure
The tires are overinflated at the factory for shipping.
Reduce the pressure equally in both tires to between
Important: To prevent engine damage, do not use
automotive oil (such as SAE 30 or 10W30) or fuel
mixed at the wrong gasoline-to-oil ratio.
17
and 20 psi (116 and 137 kPa).
3351-182
Rev A
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38611, Toro 726TE, Toro Power Max |
| Model Number | 38611 |
| Model Year | 2005 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Finnish |
| Serial Number | 250000001 - 250999999 |
| Product Name | Toro Power Max 726 TE Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Power Max |
| Swath | 26 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Toro |
| Engine Oil Type | Toro 2 cycle / NMMA-TCW3 |
| Gearbox Lubricant | 4.5 oz. (133ml) SAE 90 GL5 or higher |
| Engine Motor Model # | R-tek |
| Engine Motor Size | 141cc |
| Engine Motor Type | 2 Cycle EPA2 |
| Transmission Speed | 6 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 5.0 out of 5.0 based on 1 product reviews. Need man. Have to replace belts.