Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005

17
4.
engine cover and disconnect the wire from the spark
plug.
Separate the front engine cover from the rear
Adjusting the Discharge
Chute Latch
If the discharge chute does not lock into the desired
position or does not unlock so that you can move it to
another position, adjust the discharge chute latch.
1.
Remove the
fastener on the
gear cover, lift the
front of the cover
up, and slide it
back and out of the
way.
m-7147
5.
6.
7.
Clean around the base of the spark plug.
Remove the spark plug.
Examine the spark plug and replace it if it is
m–7789
cracked, fouled, dirty, or if the electrodes are worn.
2.
Loosen the bolt on the cable clamp (A).
Important: Do not clean the electrodes because grit
could enter the cylinder and damage the engine.
8.
Set the gap between
the electrodes on the
spark plug at 0.030 inch
(0.76
mm).
110
9.
to 15 ft-lb (20.4 N m).
Install the spark    plug by hand and then torque it
Note: If you do not have a torque wrench, tighten the
plug firmly.
A
B
10.
11.
12.
Insert the left belt cover into place.
m–7791
3.
Grasp the cable conduit (B) and move it toward
the front of the machine until the discharge chute
latch (C) fully engages the teeth of the gear (D).
Insert the right belt cover into place.
Secure the front engine cover to the rear engine
cover using the fasteners previously removed.
Secure the left and right belt covers using the
fasteners previously removed.
13.
C
D
m–7790
Note: The latch is spring loaded and will naturally
move into the teeth of the gear.
4.
Remove any slack in the cable by pulling the
cable conduit rearward.
5.
6.
Tighten the bolt on the cable clamp.
Install and secure the gear cover.
3351-182
Rev A
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, ,
Model Number38611
Model Year2005
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 20 pages
Document TypeOperator's Manual
LanguageEnglish, Finnish
Serial Number250000001 - 250999999
Product NameToro Power Max 726 TE Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Power Max
Swath26 inch
DischargeTwo Stage
Engine ManufacturerToro
Engine Oil TypeToro 2 cycle / NMMA-TCW3
Gearbox Lubricant4.5 oz. (133ml) SAE 90 GL5 or higher
Engine Motor Model #R-tek
Engine Motor Size141cc
Engine Motor Type2 Cycle EPA2
Transmission Speed6 Forward/2 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 5.0 out of 5.0 based on 1 product reviews.
Submit your review (optional)
(will not be displayed)
* Required Field

Toro Power Max 726TE 38611 Snow Blower Operators Manual, 2005 SKU UPC Model
Bill Pozun on Feb 04, 2014.

Need man. Have to replace belts.


Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website