5.
Rod
Installing the Chute Control
2.
Secure the lower chute control bracket (attached to
the chute control rod) to the lower left side of the
handle with a bolt, a curved washer, a flat washer,
and a locknut (Figure 10).
Chute control rod assembly (rod and bracket, worm
gear, and bracket)
1
Note: The bracket should be fastened on the inside
of the handle, and the rod should be approximately
parallel to the ground and not touch the handle.
1
2
1
3
1
1
Belleville washer
Bolt
Carriage bolt
Locknut
Note: Leave the locknut loose.
3. Apply No. 2 general purpose grease to the worm
gear (Figure 11).
Curved washer
Flat washer
Procedure
1.
Secure the upper chute control bracket (attached to
the chute control rod) to the upper left side of the
handle with a bolt and a locknut (Figure 10).
Figure 11
1.
2.
Worm gear
Bracket
3.
4.
Mounting flange
Bolt, Belleville washer,
and locknut
4.
Loosely mount the worm gear and the bracket to the
mounting flange with a bolt, a Belleville washer, and
a locknut as shown in Figure 11.
5.
6.
7.
Slide the worm gear into the teeth of the chute
retaining ring and tighten the locknut (Figure 11).
Tighten the locknuts that secure the 2 chute control
brackets (Figure 10).
Check the operation of the chute control rod, and
move the worm gear slightly outward if it binds.
6.
Filling the Engine with Oil
Procedure
Figure 10
Your snowthrower comes with 21 oz. (0.62 l) of oil in
the engine.
1.
Chute control rod
4.
5.
Upper chute control
bracket
Curved washer
2.
3.
Worm gear, bracket, and
mounting flange
Note: Before starting the engine, check the oil level
and add oil if necessary.
Lower chute control
bracket
6.
Flat washer
Max. fill: 21 oz. (0.62 l), type: automotive detergent
oil with an API service classification of SF, SG, SH, SJ,
SL, or higher.
Note: Leave the locknut loose.
10
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38606, Toro 38607, Toro 622R, Toro Power Max 622E |
| Model Number | 38606, 38607 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Polski, Slovenčina, Svenska |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro 622R Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Small Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Fwd. .9 / 1.3 / 1.9 Rev. 1.3 mph |
| Engine Motor Model # | OH195SA-72566G |
| Engine Motor Size | 195cc |
| Engine Motor Type | 4 Cycle CARB2 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)