Toro Power Max 622E 622R 38606 38607 Snow Blower Operators Manual, 2007

Unclogging the Discharge
Chute
Operating Tips
If the auger/impeller is running but there is no snow
coming out of the discharge chute, the discharge chute
may be clogged.
When the snowthrower is in operation, the
impeller and auger can rotate and cut off or
injure hands and feet.
To unclog the discharge chute, stay in the operating
position and release the left hand (traction) lever.
While running the auger/impeller, push down on the
handles to raise the front of the snowthrower a few
inches (cm) off the pavement. Then lift the handles
quickly to bump the front of the snowthrower on
the pavement. Repeat if necessary until a stream of
snow comes out the discharge chute.
•   Before adjusting, cleaning,  inspecting,
troubleshooting, or  repairing the
snowthrower, stop the engine and wait for
all moving parts to stop. Disconnect the
wire from the spark plug and keep it away
from the plug to prevent someone from
accidentally starting the engine.
If you cannot unclog the discharge chute by bumping
the front of the snowthrower, stop the engine, wait
for all moving parts to stop, and use the cleanout
tool; never use your hand.
•   Remove an obstruction from the discharge
chute; refer to Unclogging the Discharge
Chute. If necessary, use a stick, not your
hands, to remove an obstruction from the
discharge chute.
Important: Unclogging the discharge chute by
bumping the front of the snowthrower on the
pavement may cause the skids to move. Adjust
the skids and tighten the skid bolts securely.
•   Stay behind the handles and away from
the discharge opening while operating the
snowthrower.
Keep face, hands, feet, and any other part of
your body or clothing away from concealed,
moving, or rotating parts.
Preventing Freeze-up
In snowy and cold conditions, some controls and
moving parts may freeze. Do not use excessive
force when trying to operate frozen controls. If
you have difficulty operating any control or part,
start the engine and let it run for a few minutes.
The rotor blades can throw stones, toys, and
other foreign objects and cause serious personal
injury to the operator or to bystanders.
After using the snowthrower, let the engine run for a
few minutes to prevent moving parts from freezing.
Engage the auger/impeller to clear any remaining
snow from inside the housing. Rotate the discharge
chute control to prevent it from freezing. Stop the
engine, wait for all moving parts to stop, and remove
all ice and snow from the snowthrower.
•   Keep the area to be cleared free of all objects
that the rotor blades could pick up and
throw.
Keep all children and pets away from the
area of operation.
With the engine off, pull the recoil starter handle
several times to prevent the recoil starter from
freezing up.
Always set the throttle lever to the Fast position
when throwing snow.
If the engine slows down under a load or the wheels
slip, shift the snowthrower into a lower gear.
If the front of the snowthrower rides up, shift the
snowthrower into a lower gear. If the front continues
to ride up, lift up on the handles.
15
Product Specification
CategoriesSnow Blower Manuals, Toro Snow Blower
Tags, , ,
Model Number38606, 38607
Model Year2007
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOperator's Manual
LanguageEnglish, Polski, Slovenčina, Svenska
Serial Number270000001 - 270999999
Product NameToro 622R Power Throw Snowthrower
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower
Product TypeSnowthrower
Product SeriesSnowthrower, Two Stage Small Frame
Swath22 inch
DischargeTwo Stage
Engine ManufacturerTecumseh
Engine Oil Type21 oz. (.62l) 5w-30 or 10w / API SH or higher
Gearbox LubricantFwd. .9 / 1.3 / 1.9 Rev. 1.3 mph
Engine Motor Model #OH195SA-72566G
Engine Motor Size195cc
Engine Motor Type4 Cycle CARB2
Transmission Speed3 Forward/1 Reverse
Transmission TypeFriction Disc
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website