1.
Installing the Handle
1
Handle
4
4
1
Bolts
Belleville washers
Flange nut
Procedure
1.
Remove the tie straps that secure the control rods
to the handle.
2.
Remove the axle pins from both wheels and slide
the wheels outward on the axle approximately 1 inch
(2.5
cm) (Figure 3).
Figure 4
1.
2.
Traction rod
Flange nut
3.
4.
Lower traction rod loop
Flange locknut
4.
Position the left side of the handle assembly against
the side of the snowthrower and insert the end of
the traction rod through the lower traction rod loop
(Figure 4).
5.
6.
Align the holes in the left side of the handle assembly
with the holes in the left side plate, and secure the
handle with 2 cap screws and Belleville washers until
they are finger tight (Figure 3).
Note: The concave side of the Belleville washer
goes against the outside of the handle.
Figure 3
1.
Axle pin (2)
3.
Handle
Align the holes in the right side of the handle
assembly with the holes in the right side plate, and
secure the handle with 2 cap screws and Belleville
washers until they are finger tight.
2.
Cap screw and Belleville
washer (4)
3.
Thread a flange nut (not the flange locknut) with the
flange down onto the traction rod attached to the
left side of the handle (Figure 4).
7. Ensure that the handles are at the same height, then
tighten the handle fasteners securely.
8.
Slide the wheels inward and insert each axle pin
through the hole in each wheel hub and through the
outer hole of the axle (Figure 5).
Figure 5
Note: To use tire chains (optional), install the axle
pins through the outer axle holes.
7
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38606, Toro 38607, Toro 622R, Toro Power Max 622E |
| Model Number | 38606, 38607 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Polski, Slovenčina, Svenska |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro 622R Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Small Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Fwd. .9 / 1.3 / 1.9 Rev. 1.3 mph |
| Engine Motor Model # | OH195SA-72566G |
| Engine Motor Size | 195cc |
| Engine Motor Type | 4 Cycle CARB2 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)