2.
Installing the Speed Selector
Rod
1
1
1
Speed selector rod
Cotter pin
Flat washer
Procedure
1.
Pull the speed selector arm (Figure 6) to the most
outward position.
Figure 7
1.
2.
Handgrip
3.
4.
1 to 2 inches (2.5 to 5 cm)
4-1/2 inches (11.4 cm)
Traction control lever
3.
Tighten the 2 flange nuts until they are finger tight.
4.
Move the speed selector lever (Figure 7) into third
gear.
Note: If the speed selector lever does not move
into third gear, adjust the speed selector before
continuing. Refer to Adjusting the Speed Selector.
5.
Slowly pull the snowthrower backward while slowly
pressing the traction control lever toward the
handgrip.
Figure 6
1.
Speed selector arm
3. Speed selector rod
Note: The adjustment is correct when the wheels
stop rolling backward and the distance between the
top of the handgrip and the bottom of the traction
control lever is 1 to 2 inches (2.5 to 5 cm) as shown
in Figure 7.
2.
Flat washer and cotter pin
2.
Move the speed selector lever (Figure 13) on the
control panel to the R (Reverse) position.
3.
Install the speed selector rod into the speed selector
arm, add a flat washer on the selector rod, and secure
it with a cotter pin (Figure 6).
6.
7.
Adjust the 2 flange nuts, if necessary, to obtain the
proper distance between the top of the handgrip and
the bottom of the traction control lever.
Tighten the flange nuts securely.
3.
Installing the Traction Rod
1
Flange locknut
Procedure
1.
Thread the flange locknut (flange side up) onto the
bottom of the traction control rod, below the loop
in the lower traction rod (Figure 4).
2.
Adjust the 2 flange nuts up or down on the traction
rod until the distance between the top of the
handgrip and the bottom of the traction control
lever is approximately 4-1/2 inches (11.4 cm) as
shown in Figure 7.
8
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38606, Toro 38607, Toro 622R, Toro Power Max 622E |
| Model Number | 38606, 38607 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Polski, Slovenčina, Svenska |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro 622R Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Small Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Fwd. .9 / 1.3 / 1.9 Rev. 1.3 mph |
| Engine Motor Model # | OH195SA-72566G |
| Engine Motor Size | 195cc |
| Engine Motor Type | 4 Cycle CARB2 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)