4.
Loosen the flange nuts that secure the selector plate
to the control panel (Figure 23).
6. With the drive assembly 1/8 inch (3 mm) from the
roll pin, tighten the flange nuts that secure the speed
selector plate.
7.
Shift the speed selector lever to the R (Reverse)
position and back to third gear to check the
adjustment.
8.
If the space between the roll pin and the drive
assembly is more than 3/16 inch (5 mm), repeat
steps 3 through 6.
9.
Install the bottom cover and return the snowthrower
to the upright position.
10.
Connect the wire to the spark plug.
Checking the Auger Gearbox
Grease
Service Interval: Yearly
Figure 23
The auger gearbox is packed with 5 oz. (140 g) of
Lubriplate MAG-1 (a low-temperature, high-pressure
grease) and is sealed at the factory. The pipe plug
(Figure 25) is for factory use only; you do not need to
check or add grease. If the gearbox is leaking grease,
contact an Authorized Service Dealer.
1.
Speed selector plate
2. Flange nuts
5.
Shift the speed selector lever to third gear and push
down on the speed selector plate to move the drive
assembly to the right.
Note: The drive assembly should be 1/8 inch (3
mm) from the roll pin; if not, slide the selector plate
(Figure 23) until the gap is 1/8 inch (3 mm); refer
to Figure 24.
Figure 25
1.
Pipe plug
Changing the Engine Oil
Service Interval: After the first 2 hours
Yearly
Figure 24
Every 25 hours
1.
Roll pin
3. 1/8 inch (3 mm)
Change the engine oil after the first 2 operating hours,
then yearly thereafter. If possible, run the engine just
before changing the oil because warm oil flows better
and carries more contaminants.
2.
Drive assembly
18
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38606, Toro 38607, Toro 622R, Toro Power Max 622E |
| Model Number | 38606, 38607 |
| Model Year | 2007 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English, Polski, Slovenčina, Svenska |
| Serial Number | 270000001 - 270999999 |
| Product Name | Toro 622R Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Small Frame |
| Swath | 22 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Oil Type | 21 oz. (.62l) 5w-30 or 10w / API SH or higher |
| Gearbox Lubricant | Fwd. .9 / 1.3 / 1.9 Rev. 1.3 mph |
| Engine Motor Model # | OH195SA-72566G |
| Engine Motor Size | 195cc |
| Engine Motor Type | 4 Cycle CARB2 |
| Transmission Speed | 3 Forward/1 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)