same end of reel, one click at a time, until the paper
is pinched lightly, when inserted from the front,
parallel to the bedknife, which results in a slight drag
when paper is pulled (Figure 44 )
Figure 43
1.
2.
Driven pulley
4 holes
3.
Idler Pulley
Figure 45
8.
Loosen the 4 roller bearing screws and the screw
securing the idler pulley.
Note: Each time the adjusting screw is rotated one
click clockwise, the bedknife moves 0.0007 inch
9.
Raise or lower the right side of the roller assembly
until the gap is less than 0.010 inch (.025 cm).
(0.0017
cm) closer to the reel. Do not overtighten
the adjusting screws.
10.
11.
Tighten the roller bearing screws.
5.
6.
Check for light contact at the other end of the reel
using paper and adjust it as required.
Adjust the belt tension and tighten the idler pulley
mounting screw (Figure 43).
After the adjustment is accomplished, check to see
if the reel can pinch paper when inserted from the
front and cut paper when inserted at a right angle to
the bedknife (Figure 45). It should be possible to cut
paper with minimum contact between the bedknife
and the reel blades. Should excessive reel drag be
evident (more than 7 inch-lb (0.79 N•m), either
backlap or grind the cutting unit to achieve the sharp
edges needed for precision cutting; refer to the Toro
reel sharpening manual.
Adjusting the Bedknife to the
Reel
The bedknife to reel adjustment is accomplished by
loosening or tightening the bedbar adjusting screws,
located on top of the mower.
1.
2.
Position the machine on a flat, level work surface.
Ensure that the reel contact is removed by turning
the bedbar adjusting screws counterclockwise
(Figure 44 ).
Adjusting the Height of Cut
1.
Verify that the rear roller is level and that the
bedknife to reel contact is correct. Tip the mower
back on the handle to expose the front and rear
rollers and the bedknife.
2.
Loosen the locknuts securing the height-of-cut arms
to the height-of-cut brackets (Figure 46).
Figure 44
1.
Bedbar adjusting screw
3.
4.
Tilt the mower back on the handle to expose the
bedknife and reel.
On one end of the front side of the reel, insert a long
strip of newspaper between the reel and bedknife
(Figure 45). While slowly rotating the reel forward,
turn the bedbar adjusting screw clockwise (on the
31
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04036, Toro 04037, Toro Greensmaster 2000, Toro Greensmaster 2600 |
| Model Number | 04036, 04037 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001-311999999 |
| Product Name | Greensmaster 2000 Mower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro GR 1000 Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)