ensures the height-of-cut is identical at both
ends of the bedknife.
7.
Tighten nuts to lock the adjustment.
Important: To avoid scalping on undulating
turf, ensure that the roller supports are
positioned rearward (the roller closer to the reel).
Note: The front roller can be put in three different
positions (Figure 49), depending on the application
and needs of the user.
Figure 46
•
Use the front position when a groomer is
installed.
1.
2.
Height-of-cut arm
3.
4.
Locknut
Height-of-cut bracket
Adjusting screw
•
•
Use the middle position without a groomer.
3.
Loosen the nut on the gauge bar (Figure 47) and set
the adjusting screw to the desired height-of-cut. The
distance between the bottom of the screw head and
the face of the bar is the height-of-cut.
Use the third position in extremely undulating
turf conditions.
Figure 49
Figure 47
1.
2.
Gauge bar
3. Nut
Height adjusting screw
Adjusting the Grass Shield
Height
4.
Hook the screw head on the cutting edge of the
bedknife and rest the rear end of the bar on the rear
roller (Figure 48).
Adjust the shield to ensure proper grass clipping
discharge into the basket.
1.
Measure the distance from top of the front support
rod to the front lip of the shield at each end of the
cutting unit (Figure 50).
Figure 48
5.
6.
Rotate the adjusting screw until the roller contacts
the front of the gauge bar.
Figure 50
Adjust both ends of the roller until the entire roller
is parallel to the bedknife.
1.
Support rod
2. Shield
Important: When set properly, the rear and
front rollers will contact the gauge bar and the
screw will be snug against the bedknife. This
2. The height of the shield from the support rod for
normal cutting conditions should be 4 inches (10
cm). Loosen the bolts and nuts securing each end of
32
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04036, Toro 04037, Toro Greensmaster 2000, Toro Greensmaster 2600 |
| Model Number | 04036, 04037 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001-311999999 |
| Product Name | Greensmaster 2000 Mower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro GR 1000 Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)