Servicing the Bedbar
Backlapping the Reel
1.
Remove the plug in the right reel drive cover
(Figure 55).
Removing the Bedbar
1.
Turn bedbar adjuster screw, counterclockwise, to
back bedknife away from reel (Figure 53).
Figure 53
1.
Bedbar adjusting screw
Spring tension nut
3. Bedbar
Figure 55
2.
1.
Cover plug
2.
Back out the spring tension nut, until the washer is
no longer tensioned against the bedbar (Figure 53).
2.
3.
Insert a 1/2 inch socket extension, connected to the
backlapping machine, into the square hole in the
center of the reel pulley.
3.
On each side of the machine, loosen the jam nut
securing the bedbar bolt (Figure 54).
Backlap according to the procedure in the Toro
Sharpening Reel and Rotary Mowers Manual, Form No.
80-300
PT.
DANGER
Contact with the reel or other moving parts can
result in personal injury.
Figure 54
•
•
Stay away from the reel while backlapping.
1.
Jam nut
2. Bedbar bolt
Never use a short handled paint brush for
backlapping. Part No. 29-9100 Handle
assembly complete or individual parts are
available from your local Authorized Toro
Distributor.
4.
Remove each bedbar bolt allowing the bedbar to be
pulled downward and removed from the machine.
Save the 2 nylon and 2 stamped steel washers on
each end of bedbar (Figure 54).
Installing the Bedbar
Note: For a better cutting edge, run a file across
the front face of the bedknife when the lapping
operation is completed. This will remove any burrs
or rough edges that may have built up on the cutting
edge.
1.
Install the bedbar, positioning the mounting ears
between the washer and the bedbar adjuster.
2.
Secure the bedbar to each side plate with the bedbar
bolts (jam nuts on the bolts) and 8 washers. Position
a nylon washer on each side of the side plate boss.
Place a steel washer outside each of the nylon
washers.
4. Install the plug in the cover when finished.
3.
4.
Torque bolts to 240 to 320 inch-lb (27 to 36 N-m).
Tighten the jam nuts until the thrust washers just
rotate freely.
5.
6.
Tighten the spring tension nut until the spring is
collapsed, then back it off 1/2 turn.
Adjust the bedbar; refer to Adjusting the Bedknife
to the Reel.
35
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro 04036, Toro 04037, Toro Greensmaster 2000, Toro Greensmaster 2600 |
| Model Number | 04036, 04037 |
| Model Year | 2011 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 311000001-311999999 |
| Product Name | Greensmaster 2000 Mower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Product Series | Toro GR 1000 Series |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)