Ariens Sno Thro 926 Series Snow Blower Service Manual

CHUTE/AUGER/IMPELLER
AUGER/IMPELLER REMOVAL
Place unit in the belt service position.
1.
Remove set screw holding auger driven pulley to shaft and remove pulley.
36.Remove three nuts holding bushings to housing  on each side.
37.Grasp auger assembly and pull gear case and auger/impeller assembly free of housing.
38.Remove bearing flanges.
39.Remove shear bolts and remove auger from shaft.
40.Check all parts for wear or replacement.
41.Assemble using reverse procedure.
SHEAR BOLTS
WARNING: Stop engine, remove key, wait for
moving parts to stop and remove wire from
spark plug before leaving operator’s position
and attempting to maintain or inspect auger.
IMPORTANT: Use only Ariens shear bolts for replacement. Use of any other type of shear bolt may result in severe
damage to unit.
Occasionally an object may enter auger/impeller housing and jam auger, breaking shear bolts which secures auger
to shaft. This allows auger to turn freely on shaft preventing damage to gear drive.
To replace shear bolt:
1.
Slide auger outward against roll pin and align hole in shaft with hole in auger. The holes in shaft for roll pins
and shear bolts will line up.
42.Drive the new shear bolt through hole (if shear bolt was broken this will drive remaining part from shaft).
43.Secure with nut.
DISCHARGE CHUTE
WARNING: DO NOT put hands or feet near
or under rotating parts. Keep clear of
discharge opening at all times.
WARNING: NEVER direct discharge of
material toward bystanders nor allow anyone
in front of equipment while unit is in operation.
Be familiar with area of operation.
To remove discharge chute unbolt the chute positioning assembly from the discharge chute. Disconnect chute
cable, deflector cable and hex shaft. Tip discharge chute forward and lift.
NOTE: Chute must rotate freely. If chute does not stay in position while throwing snow or if chute does not rotate
freely, adjust the cable under the control panel so the chute lock fingers engage or disengage the locking gear.
GB - 43
Product Specification
CategoriesAriens Snow Blower Manuals, Snow Blower Manuals
Tags, , , , , , , , , , , , , , , , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 62 pages
Document TypeService Manual
LanguageEnglish
Product BrandAriens, Snow Blower
Document File TypePDF
Publisherariens.com
Wikipedia's PageAriens
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website