Ariens Sno Thro 926001 2 3 4 5 6 926301 926501 Snow Blower Owners Manual

Install Discharge Chute and Discharge Chute
Crank
Install Discharge Chute Crank
1.
Remove the cover from the gear assembly on the
discharge chute.
(Figure 5)
1.
Grease underside of discharge chute ring (if not
already greased).
2. Release the lock teeth on the gear assembly with
your finger and rotate the discharge chute 90°
left.
2.
3.
Remove mounting hardware from auger housing.
Install discharge chute over opening in the auger
housing. Finger  tighten the mounting hardware
removed in step 2.
3. Remove and save the hairpin from the control
assembly underneath the control panel.
NOTE: Do not remove the pin installed on the chute
NOTE: Leave discharge chute pedestal loose to help
install the chute rod and connect it to the control
assembly.
rod.
NOTE: To ensure the discharge chute follows its full
range of travel, make sure the control lever is pushed
all the way to the left before installing and pinning the
chute rod.
4.
Align the holes on the end of the chute rod with
the mark on the gear assembly and slide the end
without a pin through the gear assembly, through
the loop on the chute lock cable and into the hex
hole in the control assembly.
1
IMPORTANT: The loop will prevent the control cable
from contacting the engine or muffler guard. If the loop
gets damaged, loosely tie the cable to the control rod.
NOTE: After the chute rod has been inserted through
the hex hole in the control assembly, placing the unit in
the service position (see Service Position on page 19)
will ease alignment and installation of the hair pin.
2
3
4
5.
Secure the chute rod to the control assembly with
the hair pin removed in step 3 using the proper
hole location as shown in Figure 7. Insert the hair
pin with the loop end to the left of the chute rod so
the control assembly follows a full range of travel.
1
3
2
1.
2.
3.
Mounting Hardware     4.Discharge Chute
Discharge Chute
Chute Pedestal
1
Ring
4
OS7040
OS7045
Figure 5
1.
2.
3.
4.
Chute Rod
Gear Cover
Control Assembly
Hair Pin
Figure 6
OS7060
GB - 10
Product Specification
CategoriesAriens Snow Blower Manuals, Snow Blower Manuals
Tags, , , , , , , , , , , , , , , , , , , , , , , , , , , ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 36 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandAriens, Snow Blower
Document File TypePDF
Publisherariens.com
Wikipedia's PageAriens
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website