TROUBLESHOOTING
PROBLEM
PROBABLE CAUSE
CORRECTION
Engine will not
crank/start.
1. Fuel tank is empty.
1. Fill fuel tank.
2.
3.
Fuel shut-off valve closed.
2. Open fuel shut-off valve.
3. Clean area around governor/carburetor.
Build up of dirt and residue around
governor/carburetor.
4.
5.
Key Switch not in run position.
4.
5.
Put Key Switch into run position.
Ignition switch starter circuit not
functioning.
Check for a bad starter or connections.
6.
7.
Battery discharged, wires loose.
6.
7.
8.
Check battery and connections.
Replace fuse.
Fuse on wiring wiring harness
blown.
Check for a bad starter or connections.
8.
Electric starter not functioning.
Engine stops.
1. Out of fuel.
1. Fill fuel tank.
2.
3.
Fuel shut-off valve closed.
2. Open fuel shut-off valve.
Mechanical jam in blower rake or
impeller.
3. Turn off engine, remove key, and wait for
all moving parts to stop. Check for and
remove obstruction and repair before
restart.
4.
5.
Polluted fuel supply.
Faulty spark plug.
4. Replace with clean fuel.
5. Replace or clean spark plug.
Engine problems.
1. See Engine Manual.
Does not operate in
Forward / Reverse.
1. Friction disc not adjusted properly.
1. Repair or replace friction disc. See
Friction Disc Replacement on page 28.
2.
3.
Traction belt not functioning.
2. Repair or replace traction drive belt. See
Traction Drive Belt Replacement on
page 28.
Speed selector not adjusted
properly.
3. Adjust speed selector. See Speed
Selector Adjustment on page 25.
Small rubber beads
collect in frame
1. Friction disc wear.
1. Normal friction disc wear. Chunks or
large pieces of rubber mean friction disc
should be checked and replaced as
necessary.
Unit throws snow
poorly or does not
throw snow.
1. Shear bolts broken.
1. Replace shear bolts (see Shear Bolts on
page 22).
2.
Adjust attachment clutch/brake (see
Attachment Clutch/Brake Adjustment on
page 25).
2.
Attachment clutch/brake not
adjusted properly.
3.
4.
Move unit to a warm place to thaw.
3.
4.
Auger is frozen in place.
With the engine off and auger
disengaged, check for obstructions and
remove.
Ice or debris is obstructing auger.
5.
Adjust or replace attachment drive belt
(see Attachment Clutch/Brake
Adjustment on page 25).
5.
Attachment drive belt slipping,
worn or damaged.
GB - 30
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 926001, Ariens 926002, Ariens 926003, Ariens 926004, Ariens 926005, Ariens 926006, Ariens 926101, Ariens 926102, Ariens 926103, Ariens 926300, Ariens 926301, Ariens 926302, Ariens 926303, Ariens 926304, Ariens 926500, Ariens 926501, Ariens 926504, Ariens 926505, Ariens ST11526DLE, Ariens ST11528LE, Ariens ST1328DLE, Ariens ST1328LE, Ariens ST1332DLE, Ariens ST1332LE, Ariens ST1336DLE, Ariens ST8526L, Ariens ST8526LE, Ariens ST926DLE, Ariens ST926LE |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)