REMOTE DIFFERENTIAL (926004, 005,
300, 301, 500, 501)
006,
1
2
If remote differential does not lock:
1.
Place unit in service position (see Service
Position on page 19).
2
1
2.
3.
Remove bottom cover.
Loosen jam nuts on cable. Make sure the bottom
jam nut is loosened enough to remove slack from
cable.
3
4.
Pull the cable adjuster to remove slack between
the cable adjuster and the extension spring and
hold the cable adjuster in position while tightening
the top jam nut against the unit frame. Do not
extend the spring or engage the mechanism.
3
4
4
5. Tighten the bottom jam nut.
6.
7.
Re-install bottom cover.
5
Check function of remote differential. If remote
differential does not function properly, take unit to
Dealer for repairs.
5
1.
2.
3.
Upper Position
Lower Position
Handlebar
4.Upper Mounting Bolt
5.Lower Mounting Bolt
1
Figure 21
OS7155
NOTE: Insert the hair pin with the loop end on the left
side of the chute rod so the control lever will cover its
full range of travel.
3
6.
Align correct chute rod holes in chute control
assembly as shown in Figure 22, and then secure
chute rod in position with hair pin remove in
step 1.
2
No Slack
Upper Position
Lower Position
1
1
1.Top Jam Nut
2.
3.
Bottom Jam Nut
Cable Adjuster
2
2
Figure 23
OS7165
REMOTE WHEEL LOCK (926002, 003, 102,
103, 302, 303, 304)
3
If remote wheel lock does not lock or unlock:
3
1.
Place unit in service position (see Service
Position on page 19).
1.
2.
3.
Chute Control Assembly
Hair Pin
Chute Rod
2.
3.
Remove bottom cover.
Loosen jam nuts on cable. Make sure the bottom
jam nut is loosened enough to remove slack from
cable.
Figure 22
OS7160
7.
Check and adjust attachment clutch, speed
selector and traction clutch. See Attachment
Clutch/Brake Adjustment on page 25, Speed
Selector Adjustment on page 25 and Traction
Drive Clutch Adjustment on page 26.
4.
Pull the cable adjuster to remove slack between
the cable adjuster and the extension spring and
hold the cable adjuster in position while finger
tightening the top jam nut against the unit frame.
Do not extend the spring or engage the
mechanism.
8.
Re-install bottom cover.
GB - 23
| Categories | Ariens Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Ariens 926001, Ariens 926002, Ariens 926003, Ariens 926004, Ariens 926005, Ariens 926006, Ariens 926101, Ariens 926102, Ariens 926103, Ariens 926300, Ariens 926301, Ariens 926302, Ariens 926303, Ariens 926304, Ariens 926500, Ariens 926501, Ariens 926504, Ariens 926505, Ariens ST11526DLE, Ariens ST11528LE, Ariens ST1328DLE, Ariens ST1328LE, Ariens ST1332DLE, Ariens ST1332LE, Ariens ST1336DLE, Ariens ST8526L, Ariens ST8526LE, Ariens ST926DLE, Ariens ST926LE |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Ariens, Snow Blower |
| Document File Type | |
| Publisher | ariens.com |
| Wikipedia's Page | Ariens |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)