PREPARING VEHICLE
Install Spring Anchor Bracket to Front of
Tractor
Install Tractor Weights and Chains
Preparing Vehicle
c
CAUTION: Avoid injury!
The machine may become unstable when
operating with snowblower.
Use wheel weights to improve stability when
operating with snowblower.
Remove weights from tractor after snowblower
is removed.
B
NOTE: Before you attach snowblower, REMOVE
MOWER DECK from tractor. (See Removing and
Storing Mower section in your Tractor Operator’s
Manual.)
A
M95928
1.
2.
Remove two screws (A) from the front of the tractor.
Align holes of the spring anchor bracket (B) with the
holes of the tractor and reinstall two metric screws to
secure the spring anchor bracket.
Rear Wheel Weights and Rear Tire Chains are
recommended for stability and traction.
•
•
Rear Wheel Weights - Kit Part Number BG10189
Rear Tire Chains - Kit Part Number BG10188
Install Front Axle Bracket to Rear Side of
Front Axle
Check Tire Pressure
IMPORTANT: Avoid damage! To prevent tire
damage, DO NOT use more than maximum tire
pressure shown on sidewall of tire.
C
Check tire pressure with an accurate gauge.
Add or remove air, if necessary.
B
A
Front Tire
kPa (14 psi)
Rear Tire
M95929
1.
tractor front axle.
Remove 10mm nut and washer (A) from the rear of the
100
70 kPa (10 psi)
2.
Position the front axle bracket (B) over the exposed bolt
with the flanged edges toward the rear of the tractor.
Check Tractor Engine Oil and Battery
3.
Secure the front axle bracket to the front axle (C) with
Refer to your Tractor Operator’s Manual for Cold Weather
Starting procedures.
the 10mm nut and washer.
Preparing Vehicle - 8
| Categories | John Deere Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | John Deere OMGX10742 J9 |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | John Deere, Snow Blower |
| Document File Type | |
| Publisher | deere.com |
| Wikipedia's Page | John Deere |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)