OPERATING
used on rough surfaces, increase tension on lift assist
spring by removing hair cotter pin and pulling several
links up through hole in spring anchor bracket and
replacing hair cotter pin.
3.
Adjust chain and toggles evenly.
A
Adjusting Skid Shoes
c
CAUTION: Avoid injury! Rotating auger is
M95957
dangerous.
4.
Loosen six nuts (A) on the inside of the auger housing
Before making adjustment:
which secure the skid shoes.
•
Park the machine safely and lock the park
5. Allow skid shoes to drop to the ground.
brake before getting off the seat.
6.
7.
Retighten six nuts securing skid shoes.
Lower snowblower to the ground.
•
•
•
Turn the snowblower off.
Stop the engine.
Adjusting Skid Shoes for Use on Concrete or Even
Surfaces
Wait for all moving parts to stop.
1.
Place snowblower in raised position.
IMPORTANT: Avoid damage! Both the scraper and
skid shoes are subject to wear and are designed for
easy replacement. Replace before wear is excessive
to prevent damage to the auger housing or snow
auger.
2. Loosen six nuts (A) on the inside of auger housing
which secure the skid shoes.
3.
4.
Lower snowblower to ground level.
Retighten six nuts to secure skid shoes.
The skid shoe mounted on each side of the header housing
adjusts the distance the scraper blade is raised above the
surface.
Unplugging Discharge Chute
•
When removing snow from an uneven surface or a
gravel driveway, it is advisable raising scraper as high
above the surface as possible to prevent possible damage
to the snow auger and to help prevent stones from being
thrown with snow.
c
CAUTION: Avoid injury! Rotating auger is
dangerous.
•
brake before getting off the seat.
Park the machine safely and lock the park
•
the scraping surface as possible.
On blacktop or concrete, keep the scraper as close to
•
•
•
Turn the snowblower off.
Stop the engine.
Adjusting Skid Shoes for Use on Gravel Driveways or
Uneven Surfaces
Wait for all moving parts to stop.
NOTE: Make sure both skid shoes are adjusted to keep
scraper level even with scraping surface.
• Disconnect spark plug wire(s) to prevent
engine from starting accidently.
1.
2.
3.
Place snowblower in raised position.
Place 2 x 4 blocks under both ends of the scraper.
Lower snowblower scraper onto blocks.
If snowblower becomes plugged with snow or jammed due
to hitting an obstruction, proceed as follows:
Operating - 19
Categories | John Deere Snow Blower Manuals, Snow Blower Manuals |
---|---|
Tags | John Deere OMGX10742 J9 |
Download File |
|
Document Type | Owner's Manual |
Language | English |
Product Brand | John Deere, Snow Blower |
Document File Type | |
Publisher | deere.com |
Wikipedia's Page | John Deere |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)