MTD Cub Cadet 1345 SWE 45-Inch Snow Blower Owners Manual

SECTION 3:  KNOWING YOUR SNOW THROWER
WARNING: Be familiar with all the controls and their proper operation. Know how to stop the machine
and disengage them quickly.
Auger
Control
Headlight
Traction Control /
Auger Control Lock
Fuel Tank
Discharge
Chute
Shift
Lever
Chute
Left Wheel
Steering Control
Right Wheel
Steering Control
Tilt
Control
Chute Crank
Auger
Skid Shoe
Figure 9
Traction Control / Auger Control Lock
Shift Lever
The shift lever is located in the center of the
handle panel and is used to determine
ground speed. It can be moved into any of
eight positions for speed and direction
variations as described below. Always
release traction the control before changing
speeds.
The traction control is located on the right handle. Refer
to Figure 9. Squeeze the traction control to engage the
wheel drive. Release to stop.
This same lever also locks the auger control so you can
operate the chute crank without interrupting the snow
throwing process. If the auger control is engaged
simultaneously with the traction control, the operator
can release the auger control (on the left handle) and
the augers will remain engaged. Release the traction
control to stop the augers and wheel drive (the auger
control must also be released).
Forward: Your snow thrower has six forward
(F) speeds. Position one (1) is the slowest
and position six (6) is the fastest.
Reverse: Your snow thrower has two
reverse (R) speeds. R1 is the slower, while R2 is faster.
IMPORTANT:  Always release the traction control before
changing speeds.
Chute Crank
The chute crank is located on the left hand side of the
snow thrower as shown in Figure 9. To change the
direction in which snow is thrown, turn the chute crank
as follows:
Auger Control
The auger control is located on the left handle.
Squeeze the auger control to engage the augers.
Release to stop the snow throwing action. The traction
control must also be released in order to stop the auger.
Turn clockwise to discharge to the left;
Turn counterclockwise to discharge to the right.
8
Product Specification
CategoriesCub Cadet Snow Blower Manuals, MTD Snow Blower Manuals, Snow Blower Manuals
Tags, ,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 28 pages
Document TypeOwner's Manual
LanguageEnglish
Product BrandMTD, Snow Blower
Document File TypePDF
Publishermtdproducts.com
Wikipedia's PageMTD Products
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website