MAINTENANCE
AFTER EACH USE
7.
8.
Carefully pull the rear of the top cover (4) up and
over the gas tank.
•
•
•
•
Check for any loose or damaged parts.
Tighten any loose fasteners.
Check and maintain the auger.
Check controls to make sure they are
functioning properly.
To install the top cover (4), reverse the above
steps.
•
•
If any parts are worn or damaged, replace
immediately.
Check all safety and instruction decals
and labels. Replace any decals or labels
that are missing or cannot be clearly read.
LUBRICATION BEFORE STORAGE
(Figure 5) Lubricate the chute control ange (7). Apply
a clinging type of grease such as Lubriplate.
3
6
HOW TO REMOVE THE TOP COVER
2
1.
2.
3.
(Figure 5) Remove the discharge chute (1).
Remove the fuel cap.
Remove the two nuts and bolts (2) from the
front of the top cover (3).
4.
5.
6.
Remove the two bolts (4) from the left and right
of the top cover (3).
4
5
1
Remove the eight screws (5) on the left and
right side of the top cover.
7
Figure 5
Remove the three screws (6) from the top
portion of the control panel.
19
| Categories | Murray Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Murray 1695538 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Lawn and Garden readers have rated Murray Walk Behind 1695538 5.25TP 21-Inch Single Stage Snow Blower Owners Manual 4.0 out of 4.0 based on 2 product reviews. I wasn’t looking for a massive snow blower. This one works really well for the size of my driveway in lighter snow conditions
Picked up used Murray snowblower last week for light jobs. Perfect size, just a little old (2007). Was looking for info re:specs for minor maintenance.