MAINTENANCE
HOW TO REPLACE THE AUGER
HOW TO ADJUST THE BRAKE PAD
1.
2.
Remove the belt cover. See “How To Remove
The Belt Cover.”
IMPORTANT: An adjustment is only necessary
if the brake pad has become loose or has been
removed. To adjust, proceed as follows:
Remove the drive belt. See “How To Replace
The Drive Belt.”
1.
2.
3.
4.
5.
6.
7.
Remove the top cover. See “How To Remove
The Top Cover.”
3
Remove the belt cover. See “How To Remove
The Belt Cover.”
Tie the auger drive lever to the handle. This
will engage the drive system.
6
(Figure 12) Loosen the screw and nut that
secure the brake pad arm (1).
Set the clearance between the brake pad
(2) and the drive belt (3) to 1/8 inch (3 mm).
4
2
5
Tighten the screw and nut that secure the
brake pad arm (1).
1
Figure 11
Connect the wire to the spark plug.
3.
4.
5.
(Figure 11) Remove the auger pulley (1) from
the auger shaft (threads are left hand; turn clock-
wise to remove).
1
3
2
To keep the auger (2) from rotating, set a
2”
x 4” piece of wood (3) on the center pad-
dle (4) to secure the auger (2).
Remove the fasteners from the bearing as-
sembly (4). Remove the bearing assembly
(4)
from the auger housing (5).
6.
7.
8.
Slide the auger (2) out the bearing assem-
bly on the right side of the snow thrower.
Figure 12
Tip the auger (2) enough to allow the auger
(2)
to slide out of the auger housing (6).
To install auger (2), reverse the above steps.
22
| Categories | Murray Snow Blower Manuals, Snow Blower Manuals |
|---|---|
| Tags | Murray 1695538 |
| Download File |
|
| Document File Type | |
| Copyright | Attribution Non-commercial |
(2 votes, average: 4 out of 4)
Lawn and Garden readers have rated Murray Walk Behind 1695538 5.25TP 21-Inch Single Stage Snow Blower Owners Manual 4.0 out of 4.0 based on 2 product reviews. I wasn’t looking for a massive snow blower. This one works really well for the size of my driveway in lighter snow conditions
Picked up used Murray snowblower last week for light jobs. Perfect size, just a little old (2007). Was looking for info re:specs for minor maintenance.