8urpxvt8uhvGi
vphv PvyRhv
8
y
•
•
•
•
•
Pull off the spark plug terminal -
Take out screw and remove the
shroud -
Unscrew and dry off the spark plug -
Set the Master Control lever toi
Crank the engine several times
with the starter
to clear the combustion chamber -
Refit the spark plug and connect
the spark plug terminal -
reassemble all other parts
Set Master Control lever
to "Warm Start"
even if engine is cold -
Press the button of the decom-
pression valve -
•
•
1
•
•
Now start the engine.
The saw chain must always throw off
a small amount of oil.
Different quantities of oil are required for
different bar lengths, types of wood and
cutting techniques.
Fuel tank run until dry
and then refueled
•
Never operate your saw without
•
•
Press the button of the decom-
pression valve -
chain lubrication. If the chain is run
dry the whole cutting attachment
will be irretrievably damaged within
a very short time.
Use the adjusting screw ( ) to vary the
oil feed rate as required.
Pull starter rope several times until
•
fuel line is primed.
Most economic setting -
turn adjusting screw to "@"
(@matic position).
To increase oil feed -
turn adjusting screw clockwise.
To reduce oil feed -
turn adjusting screw counter-
clockwise.
Always check chain lubrication and
oil level in tank before starting work.
•
•
•
Every new chain has to be broken
in for about 2 to 3 minutes.
•
After breaking in chain,
check chain tension
and adjust if necessary -
see section
Your chain must always be wetted with
a film of lubricant.
"Checking chain tension".
"#
"%
Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
---|---|
Tags | STIHL 036 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)