8
Sryhpvthi
xr
rvq
vt
•
•
•
•
Lubricate the new spring with a few
drops of non-resinous oil.
Remove the rope rotor-
see "Replacing Starter Rope".
Remove the spring housing and
parts of spring.
Fit the new spring housing -
bottom plate must face upward -
slip outer spring loop over lug -
Reinstall the rope rotor, tension the
rewind spring, fit the fan housing
and secure in position.
If the spring pops out of its housing
during installation: refit it in the
counterclockwise direction, starting
outside and working inward.
•
•
Urvvt
rvq
vt
Make a loop in the unwound starter
rope and use it to turn the rope
rotor six full revolutions in the
direction of the arrow.
Hold the rotor steady -
straighten the twisted rope -
Release the rotor -
Let go of rope slowly so that it
winds onto the rotor.
The starter grip must sit firmly in the
rope guide bush. If the grip drops to
one side: Increase spring tension
by one additional turn.
When starter rope is fully extended
it must be possible to rotate the
rotor at least another half turn. If
this is not possible, the spring is
over-tensioned and could break.
Take off one turn of the rope.
Fit the fan housing on the crank-
case.
Set the Master Control lever to i
Push the remaining rope into the
starter grip so that the nipple'
is flush with the grip.
•
•
•
•
•
•
•
•
•
"%
#"
| Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
|---|---|
| Tags | STIHL 036 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)