Trpvsvphv
Since new bar/chain combinations may
be developed after publication of this
Manual, ask your STIHL dealer for the
latest STIHL recommendations.
Other bars and chains available for this
powerhead are:
@tvr
Fuel tank capacitiy:
l (1.32 US pt)
Fuel mixture: see chapter "Fuel"
0.625
STIHL single cylinder two-stroke engine
Displacement:
Bore:
Stroke:
Idle speed:
Maximum engine
speed
61.5 cm3 (3.75 cu.in)
48 mm (1.89 in)
34 mm (1.34 in)
2,500 r.p.m.
Chain lubrication:
Fully automatic, speed-controlled
reciprocating oil pump.
Additional manual oil flow control
STIHL yellow-labeled bars:
for 0.325" and 3/8" pitch:
Rollomatic "S" with sprocket nose
40, 45, 50 cm (16, 18, 20 in)
Oil tank capacity:
0.32 l (0.68 US pt)
(cut-off speed): 13,500 rpm
60
cm (24 in) 3/8" pitch only
Duromatic with stellite tipped nose
40, 45, 50 cm (16, 18, 20 in)
60 cm (24 in) 3/8" pitch only
DtvvTr
Xrvtu
without bar and chain
5.7 kg (12.6 lb)
Type:
Electronic magneto ignition (breakerless)
STIHL yellow -labeled chains:
for 0.325" pitch:
Ignition timing:
8vt6hpur
1.9
at 8,000 r.p.m.
- 2.5 mm (0.075 - 0.1 in) B.T.D.C.
Recommended cutting attachments
for compliance with § 5.12 of ANSI
Standard B 175.1-1991
Rapid-Super (26 RS),
Rapid-Micro (26 RM)
for 3/8" pitch:
Spark plug (suppressed):
(see page 11 of this Manual):
Rapid-Micro (33 RM, 36 RM),
Rapid-Super (33 RS, 36 RS, 33 RSL,
Rapid-Duro 33 RD).
Bosch WSR 6 F or NGK BPMR 7 A;
Electrode gap 0.5 mm (0.02 in)
Spark plug thread M 14x1.25,
STIHL reduced kickback bar
(with green label):
9.5
mm (0.37 in) long
for 0.325" and 3/8" pitch:
Rollomatic with sprocket nose
In order to comply with the kickback
performance requirements of § 5.12
of ANSI Standard B 175.1-1991,
do not use replacement saw chain
unless it has been designated as
meeting the ANSI § 5.12 requirements
on this specific powerhead, or has
been designated as "low kickback"
saw chain* in accordance with the
ANSI B 175.1-1991 standard.
40,
45 or 50 cm (16, 18 or 20 in)
AryPvyTr
STIHL low kickback chain*
(with green label):
8.25 mm (0.325") Rapid-Micro 2
(26 RM 2)
Carburetor:
All position diaphragm carburetor
with integral fuel pump
9.32
mm (3/8") Rapid-Micro 2
Air filter:
Prefilter and bisectional box filter
(33 RM 2, 36 RM 2)
Chain sprocket:
8-tooth
7-tooth
for 0.325" pitch or
for 3/8" pitch
*See definition of "low kickback chain"
on page 15 of this Manual.
"%
#(
Categories | Chainsaw Manuals, STIHL Chainsaw Manuals |
---|---|
Tags | STIHL 036 |
Download File |
|
Language | English, Español |
Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Chainsaw |
Document File Type | |
Publisher | stihl.com |
Wikipedia's Page | Stihl |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)