English
Adjust correctly
Lawn edging
N
N
Tighten down the wingnut
clockwise.
90°
Standing in the normal working
position, check the depth of cut
again and correct it if necessary,
2
3
B
The depth of cut depends on the
uneveness of the ground, your height
and the way you hold the edger. Use the
following procedure:
N
N
Starting the engine
Start the cut at no less than half
throttle and continue cutting at full
throttle.
Do not adjust the deflector.
N
Adjust the depth wheel (2) so that
the blade (3) just touches the
ground or breaks the surface of the
soil by no more than 0.2 in
N
N
N
N
N
N
Hold and guide your edger so that
the blade is vertical.
The deflector has been set at the factory
so that the arrow on the deflector and
the open side point away from the
operator. This ensures that cuttings and
other debris are directed away from the
machine and operator.
(5
mm) (B) in the normal working
Cut steadily so that the engine is not
lugged down – do not apply force.
position.
Cut at no more than a normal
walking pace.
Do not push the blade into the
ground.
Always walk forwards when cutting,
do not pull the unit towards you.
Edge at a steady pace to avoid
having to make several passes.
1
2
FC 70 C
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)