English
Storing the Machine
Replacing the Depth Wheel
Replacing the Skirt
For periods of 3 months or longer
Have a worn depth wheel replaced by a
servicing dealer. STIHL recommends
that you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Removing the skirt
N
Drain and clean the fuel tank in a
well ventilated area.
N
Dispose of fuel properly in
accordance with local
1
3
2
environmental requirements.
Depth wheel
N
N
Run the engine until the carburetor
is dry – this helps prevent the
carburetor diaphragms sticking
together.
4
Thoroughly clean the machine –
pay special attention to the cylinder
fins and air filter.
N
N
N
Loosen and remove the screw (1).
Remove the washer (2).
1
2
N
N
Remove, clean and inspect the
cutting blade.
Pull the skirt (3) off the lug (4) and
out of the deflector.
Store the machine in a dry, high or
locked location, out of the reach of
children and other unauthorized
persons.
N
The end of the thread on the
screw (1) is caulked to ensure that
the wingnut (2) does not work loose
and be lost.
Position of skirt
A very high torque has to be applied to
remove the wingnut from the screw. If
the parts are then reassembled, the
captive function is no longer
guaranteed. In such a case have the
screw and wingnut replaced by a
servicing dealer.
5
3
N
Position the skirt (3) correctly in
relation to the depth wheel (5): The
wheel is on the left – the skirt must
project to the right.
FC 70 C
23
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)