English
Closing the cap
Change the fuel pickup body
Starting / Stopping the
Engine
Controls
3
1
N
N
Fit the cap – grip upright –marks
must line up.
2
Turn the cap clockwise as far as
stop (approx. a quarter turn).
1
2
3
Throttle trigger interlock
Throttle trigger
Stop switch with Run and 0 = Stop
positions.
Function of stop switch and ignition
system
Change the fuel pickup body every year.
N
Open the filler cap and drain the fuel
tank.
The stop switch is normally in the Run
position: Ignition is on in this position –
the engine is ready to start and may be
started. If the stop switch is moved to the
0 position, the ignition is switched off. It
is automatically switched on again after
the engine comes to a standstill.
N
Use a hook to pull the fuel pickup
body out of the tank and take it off
the hose.
N
Fold the grip flush with the top of the
cap.
If the grip does not lie completely flush
with the cap and the detent on the grip
does not engage the recess in the filler
neck, the cap is not properly seated and
tightened and you must repeat the
above steps.
Do not kink the fuel hose – do not
use any sharp or pointed tools.
N
N
Push the new pickup body into the
hose.
Place the pickup body in the tank
and close the filler cap.
1
6
FC 70 C
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)