English
Engine Running Behavior
Lubricating the Gearbox
Rewind Starter
If engine running behavior is
To help prolong the wear life of the
starter rope, observe the following
points:
unsatisfactory even though the air filter
is clean and the carburetor is properly
adjusted, the cause may be the muffler.
N
N
N
N
Pull the starter rope only in the
direction specified.
Have the muffler checked for
contamination (carbonization) by your
servicing dealer.
2
Do not pull the rope over the edge of
the guide bushing.
STIHL recommends that you have
servicing and repair work carried out
exclusively by an authorized STIHL
servicing dealer.
Do not pull out the rope more than
specified.
Do not allow the starter grip to snap
back, guide it back into the housing
slowly – see chapter on "Starting /
Stopping the Engine."
1
Have a damaged starter rope replaced
by your dealer before it breaks
completely. STIHL recommends that
you have servicing and repair work
carried out exclusively by an authorized
STIHL servicing dealer.
Check grease level regularly, about
every 25 hours of operation.
N
Unscrew the filler plug (1). If no
grease can be seen on the inside of
the filler plug, screw the tube (2) of
STIHL gear lubricant for
brushcutters – see "Special
Accessores" – into the filler hole.
N
N
Squeeze up to 0.2 oz (5 g) grease
into the gearbox.
Do not completely fill the gearbox
with grease.
Refit the filler plug and tighten it
down firmly.
2
2
FC 70 C
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)