English
Starting the engine
Also use this setting if the engine has
been running but is still cold.
Cranking
4
N
Press the fuel pump bulb (4) at least
five times – even if the bulb is
already filled with fuel.
N
Place the unit on the ground: Check
that the cutting blade is not touching
the ground of any other obstacles.
Cold engine (cold start)
N
N
Make sure you have a firm footing.
Hold the unit firmly on the ground
with your left hand and press down
N
Pull the starter grip slowly with your
right hand until you feel it engage
and then continue pulling it slowly
and steadily. Do not pull out the
starter rope to full length – it might
otherwise break.
–
do not touch the throttle trigger or
interlock lever.
5
Do not stand or kneel on the drive
tube.
N
N
Do not let the starter grip snap back.
Guide it slowly back into the housing
so that the starter rope can rewind
properly.
N
Press in the choke lever (5) and turn
it to g at the same time.
Warm engine (warm start)
Continue cranking until the engine
runs.
5
N
Press in the choke lever (5) and turn
it to< at the same time.
FC 70 C
17
| Categories | STIHL Straight Edger Manuals, Straight Edger Manuals |
|---|---|
| Tags | STIHL FC 70 |
| Download File |
|
| Language | English, Español |
| Product Brand | STIHL. Stihl Inc, USA - Corporate phone: (757) 486-9100. International Support Information: http://stihl.com Email: info@stihl.com, Tiller Cultivator |
| Document File Type | |
| Publisher | stihl.com |
| Wikipedia's Page | Stihl |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)