Traction Speed Sensor
The traction speed sensor is attached to the upper
transaxle cover (Fig. 11). It uses a magnetically based,
Hall Effect integrated circuit. As the differential in the
transaxle turns, the sensor accurately senses the move-
ment of the differential ring gear teeth passing by the
sensor. The red striped connector wire is the positive
lead, the black wire is the ground lead, and the gray
striped wire is the signal output.
2
1
Testing
1.
Locate traction speed sensor on the transaxle as-
sembly. Disconnect the wire harness connector from the
traction speed sensor.
2.
Remove cap screw and lock washer that secure
speed sensor to transaxle. Remove speed sensor from
transaxle.
3.
Connect positive multimeter test lead to the sensor
Figure 11
connector gray striped wire terminal and the negative
multimeter lead to the connector black wire terminal
(Fig. 12). Set multimeter to ohms setting.
1.
Transaxle assembly
2.
Traction speed sensor
IMPORTANT: Incorrect jumper wire connections
during testing can damage the sensor.
4.
Using jumper wires, apply +12 VDC to the sensor
connector red striped wire terminal and ground the con-
nector black wire terminal (Fig. 12).
–
+
5.
The sensor should have very low resistance (near
12
VDC
zero) when a metal object is held near the sensor tip.
The sensor should have very high resistance (infinite)
when the metal object is moved away from the sensor
tip.
6
C B A
4
6.
After testing is complete, remove jumper wires and
5
3
multimeter leads from sensor connector. Reinstall
speed sensor into transaxle and secure with cap screw
and lock washer. Reconnect speed sensor to wire har-
ness.
1
2
Figure 12
1.
2.
3.
Speed sensor
Sensor tip
Sensor connector
4.
5.
6.
Red striped wire
Gray striped wire
Black wire
Workman 200 Spray System
Electrical System
Page 2 – 9
Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
---|---|
Tags | Toro 200 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)