Pressure Dampener
The pressure dampener is mounted to the pressure line
at the spray pump (Fig. 4) and is used to smooth system
pressure pulsation. Adjust air pressure on the pressure
dampener from 12 to 15 PSI (.82 to 1.03 bar).
2
IMPORTANT: Any fluid in the pressure dampener
will include spray system chemicals so take neces-
sary precautions when working with the dampener.
Use appropriate protective equipment: protective
clothing, chemical resistant gloves, and eye protec-
tion.
1
If fluid is present when pressure in the dampener is
checked, the diaphragm in the pressure dampener is
damaged and should be replaced.
Figure 4
2.
Dampener Service (Fig. 5)
1.
Spray pump
Pressure dampener
IMPORTANT: Make sure to neutralize and remove
chemicals from pump and hoses before loosening
and removing spray system components.
4
5
1.
Loosen and remove cap screws and nuts that secure
8
7
diaphragm between housings.
2.
3.
Remove diaphragm from dampener.
2
1
Replace diaphragm and reassemble dampener.
3
6
Figure 5
1.
2.
3.
4.
Spray pump
O–ring
Hex nut (12 used)
Rear housing
5.
6.
7.
8.
Diaphragm
Front housing
Cap screw (12 used)
Air valve
Workman 200 Spray System
Spray System
Page 3 – 9
| Categories | Lawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals |
|---|---|
| Tags | Toro 200 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)