Removal (Fig. 15)
Empty sweeper hopper and position sweeper on a
level surface. Chock sweeper wheels to prevent sweep-
er from moving. If sweeper is attached to tow vehicle,
engage tow vehicle parking brake, stop engine and re-
move key from the ignition switch.
Installation (Fig. 15)
1.
1. If removed, install hydraulic check valve fitting and
new o–ring into lift cylinder.
2.
Position lift cylinder to the machine mounting points.
Make sure the port of the lift cylinder faces the front of
the machine.
3.
Install pivot pins. Secure pivot pins to frame with cap
screws and lock nuts.
Align lift cylinder mounting holes with frame mounts.
CAUTION
Operate all sweeper hydraulic controls to relieve
system pressure and to avoid injury from pres-
surized hydraulic oil. See Relieving Hydraulic
System Pressure in the General Information sec-
tion of this chapter.
4.
Remove plugs from disconnected hose and fitting.
5.
fitting on lift cylinder. Tighten hose connection.
Connect hydraulic hose with new o–ring to hydraulic
2.
3.
Relieve sweeper hydraulic system pressure.
Disconnect hydraulic hose from hydraulic fitting on
lift cylinder. Locate and discard o–ring from between
hose and fitting. Allow hose to drain into a suitable con-
tainer.
4.
Plug disconnected hose and fitting to prevent con-
tamination.
5.
Remove lock nuts (item 5) and cap screws (item 3)
that are used to retain lift cylinder pivot pins (item 4) to
sweeper frame.
CAUTION
To prevent personal injury, make sure that lift
cylinder is supported as it is removed from the
machine. Lift cylinder weighs approximately
43
pounds (19.5 kg).
6.
Support lift cylinder and slide pivot pins from the lift
cylinder and machine frame.
7.
8.
Remove lift cylinder from the machine.
If needed, remove hydraulic check valve fitting and
o–ring from the lift cylinder. Discard o–ring.
Pro Sweep 5200
Page 3 – 23
Hydraulic System
Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
---|---|
Tags | Toro Pro Sweep 5200 |
Download File |
|
Document Type | Service Manual |
Language | English |
Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
Product Type | Walk Behind Mower |
Document File Type | |
Publisher | toro.com |
Wikipedia's Page | Toro Company |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)