IMPORTANT: When removing seal components, be
careful not to scratch or damage piston or head.
IMPORTANT: Do not clamp vise jaws against rod
surface. Protect rod surface before mounting in
vise.
6.
Remove and discard seal kit components from the
head and piston.
3. Mount rod securely in a vise by clamping vise on the
pivotendoftheshaft.Carefullyslideheadassemblyand
piston assembly onto the rod.
Inspection
4.
from 250 to 300 ft--lb (339 to 407 N--m).
Thread lock nut (item 13) onto rod. Torque lock nut
CAUTION
5.
Remove rod assembly from vise.
Use eye protection such as goggles when using
compressed air
IMPORTANT: Prevent damage when clamping the
tube into a vise; clamp on the pivot end only.
1.
air.
Wash all parts in solvent. Dry parts with compressed
6.
ly.
Mount tube in a vise so that the rod end tilts up slight-
2.
out--of--roundness and bending. Replace if worn or
damaged.
Inspect internal surface of tube for deep scratches,
IMPORTANT: When installing the head into the
tube, pay careful attention to the retaining ring slot
in the tube to insure that the backup ring does not
lodge in the slot.
3.
Inspect rod, piston and head for excessive pitting,
scoring or wear. Replace any worn or damaged parts.
7.
Coat all internal lift cylinder parts with a light coating
ofclean hydraulic oil.Sliderod assembly into tubebeing
careful not to damage the seals.
Assembly (Fig. 16)
1.
oil.
Coat new seal kit components with clean hydraulic
8.
8).
Secure head in tube by installing retaining ring (item
Align retaining ring hole in the head with the access
slot in the tube. Insert the retaining ring hook into the
hole and rotate head clockwise until the retaining ring is
completely pulled into the tube and the ends are cov-
ered. Apply silicone sealer to barrel access slot.
IMPORTANT: When installing seal components, be
careful not to scratch or damage piston or head.
2.
Install new seals to the head and piston.
Pro Sweep 5200
Page 3 -- 25 Rev. A
Hydraulic System
| Categories | Lawn Mower Manual, Toro Lawn Mower Manual |
|---|---|
| Tags | Toro Pro Sweep 5200 |
| Download File |
|
| Document Type | Service Manual |
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower |
| Product Type | Walk Behind Mower |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)