DISASSEMBLY, INSPECTION, & REPAIR
DISASSEMBLE MAJOR
3.
COBlowersMPONAndENBlower/Vacs—TS (cont.)Install the lower
For Models 280, 300BV, 310, And 310BV
plate of heat shield to the main part of
shield. Secure the lower plate with 4 screw
2.
Install the heat shield and mounting screw to
muffler body. Make sure the holes in the
heat shield align with mounting holes in muf-
fler body.
Torque the screw 15-25 in•lb (1.7-2.8 N•m).
3
2.6089.056
Remove Clutch
Some units are equipped with a clutch. If no clutch
exists proceed to “Remove Starter Housing.”
1.
Remove the four screws securing the clutch
cover to starter housing. Remove the clutch
cover.
NOTE: Early models used Loctite® to secure
the screw in the clutch drum. It may be difficult
to remove these screws, use a hardened screw-
driver, or screwdriver bit with a clean and sharp
blade.
Units with serial number 71200438 and greater
use a #T20 Torx® head screw to secure the
clutch drum.
2.6089.055
2.
3.
Install flywheel holder, P/N 612470.
Using the appropriate screwdriver or screw-
driver bit, loosen screw inside of the clutch
drum.
Remove the clutch drum.
2.6089.060
3-29
| Categories | Blower Vacuum and Sweeper Manuals, Toro Blower and Vacuum Manuals |
|---|---|
| Tags | Toro A 31, Toro Two Cycle Engine |
| Download File |
|
| Language | English |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Blowers, Vacuums |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)