repairs, adjustments, or inspections. Never place
your hand in the discharge or collector openings.
Use a stick or wooden broom handle to unclog the
discharge opening.
• Never direct discharge at bystanders or allow any-
one in front of unit.
•
Disengage power to collector/impeller when trans-
porting or not in use.
•
•
Take all possible precautions when leaving the unit
unattended. Disengage the collector/impeller, stop
the engine, and remove the key.
•
Use only attachments and accessories approved
by the manufacturer of snow thrower (such as
wheel weights, counter weights, cabs, etc.).
When cleaning, repairing, or inspecting, make cer-
tain collector/impeller and all moving parts have
stopped. Disconnect spark plug wire and keep
away from plug to prevent accidental starting.
•
•
Never operate the snow thrower without good visi-
bility or light. Always be sure of your footing and
keep a firm hold on the handles. Walk, never run.
Muffler and engine become hot and can cause a
burn. Do not touch.
•
•
Do not run engine indoors, except when starting
engine and transporting snow thrower in or out of
building. Open doors. Exhaust fumes are danger-
ous.
4. MAINTENANCE AND STORAGE
•
Check shear bolts, engine mounting bolts, etc., at
frequent intervals for proper tightness to be sure
equipment is in safe working condition.
Do not clear snow across the face of slopes. Exer-
cise extreme caution when changing direction on
slopes. Do not attempt to clear steep slopes.
•
Never store the machine with fuel in the fuel tank
inside a building where ignition sources are
present, such as hot water and space heaters,
clothes dryers, and the like. Allow engine to cool
before storing in any enclosure.
•
•
Never operate snow thrower without guards, plates,
or other safety protection devices in place.
Never operate snow thrower near glass enclosure,
automobiles, window wells, drop off, etc., without
proper adjustments of snow thrower discharge
angle. Keep children and pets away.
• Always refer to operator's manual instructions for
important details if snow thrower is to be stored for
an extended period.
•
•
Do not overload machine capacity by attempting to
clear snow at too fast a rate.
• Run machine a few minutes after throwing snow to
prevent freeze up of collector/impeller.
Never operate the machine at high transport
speeds on slippery surfaces. Look behind and use
care when backing.
• Check clutch controls periodically to verify they
engage and disengage properly and readjust if nec-
essary. Refer to operator's manual for adjustment
instructions.
WARNING - YOUR RESPONSIBILITY: Restrict the use of this power machine to persons
who read, understand and follow the warnings and instructions in this manual and on the machine.
.
YA WA GNI THOL C D AN
EFE, NDHSAPEEK
WARNING
T
-
RE AUGNGTI TAOR
RFOMY URNIJ
OVIDA 1. STOP ENGINE BEFORE REMOVING
DEBRIS AND SERVICING UNIT.
2. KEEP CLEAR OF IMPELLER WHILE
ENGINE IS RUNNING.
3
. NEVER DIRECT DISCHARGE AT
BYSTANDERS OR WINDOWS OR
ALLOW ANYONE IN FRONT OF
UNIT.
SHUT OFF ENGINE
BEFORE
UNCLOGGING
4
. THOROUGHLY INSPECT THE AREA
WHERE THE EQUIPMENT IS TO BE
USED AND REMOVE ALL DOOR
DISCHARGE CHUTE.
MATS, SLEDS, BOARDS, WIRES AND
DANGE
OTHER FOREIGN OBJECTS.
R
5
. REFER TO OWNERS MANUAL FOR
FULL INSTRUCTIONS.
Figure 2
4
| Categories | MTD Snow Blower Manuals, Snow Blower Manuals, Yard Machines Snow Blower Manuals |
|---|---|
| Tags | MTD E600E, MTD E610E, MTD E640F, MTD E660G, MTD E6C0F, MTD Snow Blower Manual, Yard Machines E600E, Yard Machines E610E, Yard Machines E640F, Yard Machines E660G, Yard Machines E6C0F |
| Download File |
|
| Document Type | Owner's Manual |
| Language | English |
| Product Brand | Yard Machines, E600E, E610E, E640F, E660G, E6C0F, Snow Blower |
| Document File Type | |
| Publisher | mtdproducts.com |
| Wikipedia's Page | MTD Products |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)