1
2
3
4
4
5
3
6
1
2
m–4034
Figure 16
879
1.
2.
Ignition switch
Choke
3.
4.
Throttle
Figure 15
Primer
1.
Auger/impeller drive
control lever
4.
5.
6.
Discharge chute control
Chute deflector handle
Fuel shutoff valve
•
•
Choke (Fig. 16)—Rotate the choke clockwise to the On
position to start a cold engine. As engine warms up,
gradually rotate the choke counterclockwise to the Off
position.
2.
3.
Traction control lever
Speed selector
•
•
Traction Control Lever (Fig. 15)—To engage the
traction (wheel drive), press the lever against the left
handgrip. To stop the traction, release the lever.
Throttle (Fig. 16)—Move the throttle upward to
increase the engine speed; move it downward to
decrease the engine speed. Move the throttle to the Stop
position to stop the engine.
Speed Selector (Fig. 15)—This control has 7 positions:
5
forward and 2 reverse gears. To change speeds, move
•
•
Primer (Fig. 16)—Press the primer to pump a small
amount of gasoline into the engine for improved
cold-weather starting.
the speed selector to the desired position. The lever
locks in a notch at each speed selection. The speed
selector may shift with difficulty in heavy load
conditions.
Recoil Starter (Fig. 17)—The recoil starter is on the
back side of the engine. Pull the recoil starter to start the
engine.
Note: Before shifting gears into or out of reverse, you
must release the traction control lever. You may shift
between any of the forward speeds without releasing the
traction control lever.
1
•
Discharge Chute Control (Fig. 15)—Rotate the
discharge chute control clockwise to move the
discharge chute to the left; counterclockwise to move
the chute to the right.
934
•
•
Chute Deflector Handle (Fig. 15)—Move the deflector
handle forward to move the snow stream down; move it
rearward to move the snow stream up.
Figure 17
1.
Recoil starter
Fuel Shutoff Valve (Fig. 15)—Close the valve by
rotating it clockwise. Open the valve by rotating it
counterclockwise. Close the valve when you do not use
the snowthrower.
•
Ignition Switch (Fig. 16)—Insert the key before
starting the engine. To stop the engine, remove the key.
14
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38053, Toro 521, Toro 824 Power Throw |
| Model Number | 38053 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | 824 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 5 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)