3.
Hold the handle assembly in the installation position
and insert the upper traction rod through the loop in the
lower traction rod (Fig. 4).
3
1
4
2
473
Figure 5
3
2
1.
Inner axle hole and wheel
hub
2.
3.
Outer axle hole
Axle pin
1
m-4039
Note: To use tire chains (optional), install the axle pins
through the outer axle holes.
Figure 4
1.
2.
3.
Lower traction rod
Loop
4.
Left side of handle
assembly
Installing the Speed Selector
Rod
Upper traction rod
1.
Pull the speed selector arm (Fig. 6) to the most outward
position.
4.
Position the left side of the handle assembly against the
left side of the snowthrower, align the handle mount
holes with the holes in the side plate, and secure the left
side of the handle assembly with 2 bolts and curved
washers until they are finger tight (Fig. 3).
Note: The concave side of the curved washer goes
3
against the outside of the handle.
4
5.
Position the right side of the handle assembly against
the right side of the snowthrower, align the handle
mount holes with the holes in the side plate, and secure
the right side of the handle assembly with 2 bolts and
curved washers until they are finger tight.
2
1
m-2672
Figure 6
1.
2.
Speed selector arm
Cotter pin
3.
4.
Flat washer
Speed selector rod
6.
7.
Ensure that both sides of the handle assembly are in line
with each other and then tighten the bolts that hold the
handle assembly.
2. Move the speed selector (Fig. 15) on the control panel
to the R2 (Reverse) position.
Slide the wheels inward and insert each axle pin
through the hole in each wheel hub and through the
inner hole of the axle (Fig. 5).
3. Rotate the speed selector rod in the trunnion (Fig. 7)
until the bottom end of the rod can slip into the hole in
the speed selector arm (Fig. 6).
9
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38053, Toro 521, Toro 824 Power Throw |
| Model Number | 38053 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | 824 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 5 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)