2
4
5
1
1
3
m-2677
Figure 27
m-2678
Figure 29
1.
2.
3.
Traction drive belt
Engine pulley
4.
5.
Engine pulley sheave
Auger/impeller drive belt
1.
Tabs in holes
Indexing rib in indexing
notch
19.
Have someone squeeze the auger/impeller drive control
lever (Fig. 15) against the handgrip, and install the belt
guide using 2 bolts, 2 washers, and 2 lock washers.
14.
Pull the idler pulley outward and loop the
auger/impeller drive belt in front of the engine pulley,
ensuring that the belt is on the inside of the idler pulley
(Fig. 26).
20. Check and adjust the belt guide, and ensure that it does
not contact any part of the engine pulley.
15.
16.
Install the engine pulley sheave, ensuring that the
indexing rib in the engine pulley sheave aligns with the
indexing notch in the engine pulley (Fig. 27).
21. Check and adjust the auger/impeller drive control
linkage. Refer to steps 5 through 7 of Installing the
Auger/Impeller Drive Control Linkage on page 10.
Install the washer, lock washer, and crankshaft bolt that
secures the engine pulley sheave (Fig. 27).
22. Install the idler pulley spring.
23.
24.
Install the belt cover with the 3 bolts.
Connect the wire to the spark plug.
Note: Do not to pinch the auger/impeller drive belt
(Fig. 27).
Important
and the impeller rotate when you disengage the
auger/impeller drive control lever.
Do not operate the snowthrower if the auger
17.
Ensure that the brake pad is properly installed on the
brake arm. Position the angled cutoff on the brake pad
as shown in Figure 28.
Adjusting the Auger/Impeller
Drive Belt
1
2
Operating the snowthrower with an auger/impeller drive
belt that slips decreases the snowthrowing performance and
damages the belt. Check the auger/impeller drive belt for
the proper tension after the first operating hour, after every
3
4
m-2681
5
necessary.
operating hours thereafter. Adjust the belt when
Figure 28
View from left side of unit
1.
2.
Brake pad
3.
4.
Auger/impeller drive belt
Traction drive belt
Angled cutoff
18.
Install the 2 screws that secure the auger brake arm
assembly. Ensure that the tabs fit into the holes in the
left side of the snowthrower (Fig. 29).
22
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38053, Toro 521, Toro 824 Power Throw |
| Model Number | 38053 |
| Model Year | 2002 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 220000001 - 220999999 |
| Product Name | 824 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB1, EPA1 |
| Transmission Speed | 5 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)