Toro 02104SL Rev D Groundsmaster 4500 D 4700 D Service Manual

Removal (Fig. 91)
Park machine on a level surface, lower cutting units,
stop engine,  engage parking  brake, and remove  key
from the ignition switch.
1.
#4
Deck
#1 Deck
#5 Deck
2.
Installing Hydraulic System Components at the begin-
ning of the Service and Repairs section of this chapter.
Read the  General Precautions  for Removing  and
NOTE:  To ease reassembly, tag the hydraulic hoses to
showtheircorrectpositionontheliftcylinder.Also,clean
hydraulic fittings and hose ends prior to disconnecting
the hoses.
#
2
#3
Deck
#
6 Deck
#7 Deck
(GM4700)
Deck
(GM4700)
3.
Disconnect hydraulic hoses from lift cylinder.
4.
Remove flange nut and flange head screw that se-
cure the cylinder pin (4) to the lift arm. Remove pin from
lift arm and cylinder shaft clevis which will free lift cylin-
der from lift arm.
CUTTING DECK LOCATIONS
Figure 92
5.
cure the  cylinder pin (13)  to the  frame. Pull pin  from
frame and cylinder barrel clevis.
Remove flange nut and flange head screw that se-
6.
Remove lift cylinder from machine.
Installation (Fig. 91)
Position cylinder barrel clevis toframeand insertcyl-
1.
inder pin  (13) into  frame and clevis.  Secure pin  with
flange nut and flange head screw.
2.
shaft clevis. Secure pin  to lift arm with flange nut  and
flange head screw.
Insert cylinder pin  (4) through lift arm and cylinder
3.
Attach hydraulic hoses to lift cylinder.
4.
Fill reservoir  with hydraulic  fluid as  required (see
Traction Unit Operator’s Manual).
5.
verify that hydraulic hoses and fittings are not contacted
by anything.
After assembly is completed, operate lift cylinder to
Groundsmaster 4500--D/4700--D
Page 4 -- 107
Hydraulic System (Rev. A)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 274 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website