Toro 02104SL Rev D Groundsmaster 4500 D 4700 D Service Manual

Procedure  for Rear  Traction  Circuit  (RV5) Relief
Pressure Test
1.
perature by operating the machine for approximately 10
minutes. Make sure the hydraulic tank is full.
Make sure hydraulic oil is at normal operating tem-
1
2.
lowered and off. Make sure engine is off and the parking
brake is engaged.
Parkmachineonalevelsurfacewiththecuttingunits
2
CAUTION
Figure 46
2WD/4WD control manifold (GM 4500--D shown)
Relief valve test port
Prevent personal injury and/or damage to equip-
ment. Read all WARNINGS, CAUTIONS, and Pre-
cautions for Hydraulic Testing at the  beginning
of this section.
1.
2.
2
3.
Connect a 1000 PSI gauge to test port on 2WD/4WD
control manifold under operator’s seat (Fig. 46).
4.
(2800
Start the engine and put throttle at full engine speed
+ 50 RPM).
5.
Operate the machine in 4WD with the cutting  units
lowered. Drive down a slope in a forward direction, de-
crease pressure on the traction pedal, and monitor the
pressure gauge. Pressure should increase until the re-
lief valve lifts.
1
Figure 47
1.
Manifold: lower side
2.
Relief valve (RV5)
GAUGE READING TO BE 520 to 570 PSI.
6.
of the 2WD/4WD control manifold (Fig. 47). Adjustment
of the relief valve can be performed as follows:
Relief valve (RV5) is located on the lower, rear side
NOTE:  Do not  remove the  valve  from the  hydraulic
manifold for adjustment.
A.  To increase relief pressure setting, remove cap
on relief valve and turn the adjustment socket on the
relief valve in a clockwise direction. A 1/8 turn on the
socket will make a measurable change in relief pres-
sure (Fig. 48).
1
B.  To decrease pressure setting, remove cap on re-
lief valve and turn the adjustment socket on the relief
valve in a counterclockwise direction. A 1/8 turn on
the socket will make a measurable change in relief
pressure (Fig. 48).
2
C. Recheck relief pressure and readjust as needed.
Figure 48
1.
Relief valve cap
2.
Adjustment socket
Groundsmaster 4500--D/4700--D
Page 4 -- 47
Hydraulic System (Rev. A)
Product Specification
CategoriesLawn Mower Manual, Sprinkler and Irrigation Manuals, Toro Sprinkler and Irrigation Manuals
Tags,
Download File
Please Enter the Security Characters Shown Below. Letters are Case Sensitive. Your download link will appear upon completing this step.
- 274 pages
Document TypeService Manual
LanguageEnglish
Product BrandToro. Customer Service Representatives are available by phone: Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Lawn Mower
Document File TypePDF
Publishertoro.com
Wikipedia's PageToro Company
CopyrightAttribution Non-commercial
(0 votes, average: 0 out of 5)

Submit your review (optional)
(will not be displayed)
* Required Field

Leave a Reply

Your email address will not be published. Required fields are marked *

*
*
Website