ASSEMBLY
Assembling and dismantling the
Adjusting the harness and clearing
two-part shaft (225RD/ 232RD)
saw
Assembling:
!
WARNING!
When working with the clearing saw it
should always be hooked in the harness.
If this is not done, you cannot control the
clearing saw safely and this can result in
injury to yourself or someone else. Never
use a harness with a defective quick
release catch.
•
•
Make sure the handle is
loose.
Guide the cut-out on the
lower section of the shaft
into the coupling‘s
locking plate on the
upper section of the
shaft. The sections are
then locked together.
Quick release
On the front is an easily
accessible, quick release catch.
This is activated by pulling
the outer part of the chest
plate straight out. Use this if
the engine should catch fire
or in any other emergency
situation when you quickly
need to take off the harness
and machine.
•
Tighten the handle.
Dismantling
Even load on the
shoulders
•
•
•
•
Undo the handle (at least
three turns).
A well-adjusted harness and
clearing saw significantly
facilitates working. Adjust the
harness for the best working
position. Tension the side
straps so that the weight is
evenly distributed across the
shoulders.
Press the handle towards
the coupling.
Carefully twist the lower
section out of the lock.
Hold both parts of the
shaft and pull out the
lower section from the
coupling.
Correct height
1)
Forestry clearing
Adjust the carrier strap so
that the suspension hook
comes approximately 10
cm under the hip. The
blade should be angled
forward a little.
2)Grass
clearing
The suspension hook
should hang approximately
20
cm under the hip so
that the blade is parallel to
the ground.
Correct balance
1)Forestry
clearing
Move the suspension eye
forwards or backwards. If
the blade is balanced a 10-
20
cm above the ground it
is easier to avoid stones.
2)Grass
and brush cutting.
Let the blade balance at a
comfortable clearing
height, i.e. close to the
ground.
20
– English
Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
---|---|
Tags | Husqvarna 225R, Husqvarna 225RD, Husqvarna 225RJ, Husqvarna 232R, Husqvarna 232RD, Husqvarna 235R |
Model Year | 1995, 1996, 1997, 1998 |
Download File |
|
Document Type | Operator's Manual |
Language | English |
Product Brand | Husqvarna, Chainsaw |
Document File Type | |
Publisher | husqvarna.com |
Wikipedia's Page | Husqvarna |
Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)