SAFETY INSTRUCTIONS
4. Anti-vibration
6. Muffler
system
The muffler is designed to
give the lowest possible noise
level and to direct the
engine‘s exhaust fumes away
from the operator. Muffler
fitted with catalytic
converter is also designed to
reduce harmful exhaust
components.
In countries that have a
warm and dry climate the
risk of fire is obvious. We
have therefore fitted certain
mufflers with a spark arrest
screen. Make sure that your
Your machine is equipped
with an anti-vibration
system that has been
designed to give as vibra-
tion-free and comfortable
usage as possible.
The use of incorrectly
wound cord or blunt,
incorrect cutting
equipment (incorrect type
or incorrectly sharpened,
see section “Filing the
blade”) increases the level
of vibration.
muffler is fitted with this kind of screen. It is extremely
important that the instructions for checking, maintaining and
servicing the muffler are followed. (See the section “Control,
maintenance and service of the machine‘s safety equipment“.)
The machine’s anti-
vibration system reduces
the transfer of vibrations
between the engine unit/
cutting equipment and the
machine’s handle system.
The engine body including
the cutting equipment is
suspended in the handle
system via a vibration
element.
!
WARNING!
Mufflers fitted with catalytic converters
become extremely hot during use and
after stopping.This also applies at idling
speeds. Contact can result in burns to
the skin. Be observant to the risk of fire!
!
WARNING!
Bear in mind that exhaust fumes:
• contain carbon monoxide, which can
cause carbon monoxide poisoning.
Therefore never start or run the machine
indoors.
!
WARNING!
Over exposure to vibrations can result in
blood-vessel or nerve injury to persons
suffering with blood circulation problems.
Seek medical attention if you experience
physical symptoms that can be related to
over exposure to vibrations. Examples of
such symptoms are “numbness“, lack of
feeling, “tickling“, “pricking“, “pain“, lack
of or a reduction in normal strength,
changes in the colour of the skin or its
surfaces.These symptoms normally
appear in the fingers, hands or wrists.
• are hot and can contain sparks that can
cause fires. Never start the machine
indoors or close to inflammable material.
7.
equipment
Cutting
1
1)
Clearing blades are
intended for cutting wood.
2
2)
Grass blades are
intended for brush cutting.
5.
Quick-release
3)
intended for trimming
grass.
The trimmer head is
There is an easily accessible,
quick-release catch fitted to
the chest as a safety
3
precaution in the event of a
fire in the engine or for any
other situation that requires
you to free yourself from the
machine and harness. See the
section “Adjusting the harness
and clearing saw“.
8.
Locking nut
The locking nut secures the
cutting equipment on the
output shaft.
English –
5
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 225R, Husqvarna 225RD, Husqvarna 225RJ, Husqvarna 232R, Husqvarna 232RD, Husqvarna 235R |
| Model Year | 1995, 1996, 1997, 1998 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)