SAFETY INSTRUCTIONS
General safety instructions
Fuel safety
IMPORTANT INFORMATION
•
Never fill the machine
while the engine is
running. Always stop the
engine and let it cool for a
few minutes before
refuelling.
•
The machine is only designed for trimming grass,
brush cutting and/or forestry clearing.
•
The only accessories to be used with the engine
unit as a drive source are the cutting units we
recommend in the chapter “Technical data“.
•
Never use the machine if you are tired, if you have
consumed alcohol, or if you are taking medicines
that can affect your sight, your judgement or the
control of your body.
• Provide good ventilation
when filling or mixing fuel
(petrol and 2-stroke oil).
•
•
Use personal protective equipment. See the
section “Personal protective equipment“.
Min. 3 m
•
Move the machine at least
3 m from the filling
(10
ft)
Never use a machine that has been modified so
that it no longer corresponds with the original
design.
position before starting.
•
Never use a machine that is faulty. Follow the
maintenance, control and service instructions in
this Operator‘s Manual.
• Never start the machine:
a)If you have spilt fuel on it.
Wipe up all spillage.
Some maintenance and service actions should be
carried out by trained and qualified specialists.
See the chapter “Maintenance“.
b)If you have spilt fuel on
yourself or your clothes.
Change your clothes.
•
The machine operator shall ensure, while working,
that no persons or animals come closer than 15
metres (50 feet). When several operators are
working in the same area the safety distance
should be at least double tree length, however, at
least 15 metres (50 feet).
c)If there is a fuel leak.
Make regular checks for
leakage from the fuel cap
and the fuel supply pipes.
!
WARNING!
Faulty cutting equipment or an incorrectly
sharpened blade increases the risk of
accidents.
Transport and storage
Start
!
•
Store and transport the machine and fuel so that any leakage
or fumes do not risk coming into contact with sparks or
naked flames. For example, electric machines, electric
motors, electrical switches/power switches, heaters or the
like.
WARNING!
When the engine is started with the choke
in either the choke or start throttle positions
the cutting equipment starts to rotate
immediately.
•
•
When storing and transporting fuel approved containers
intended for this purpose must be used.
•
The complete clutch cover
with shaft must be fitted
before the machine is
started, otherwise the
clutch can become loose
and cause personal injury.
When storing the machine for long periods the fuel tank
must be emptied. Contact your local petrol station to find
out how to dispose of excess fuel.
•
•
Never start the machine
indoors. Bear in mind the
dangers of inhaling the
engine‘s exhaust fumes.
Observe your
surroundings and make
sure that there is no risk
of people or animals
•
Always keep the transport guard attached when transporting
and storing the machine.
!
WARNING!
Exercise great care when handling fuel.
Bear in mind the risk of fire, explosions and
inhaling fumes.
coming into contact with the cutting equipment.
Place the machine on the ground, ensure the cutting
equipment runs free of twigs and stones. Push the machine
body towards the ground using your left hand. (NOTE! Not
with your foot). Grip the starter handle with your right hand
and pull the starter cord.
•
English –
9
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 225R, Husqvarna 225RD, Husqvarna 225RJ, Husqvarna 232R, Husqvarna 232RD, Husqvarna 235R |
| Model Year | 1995, 1996, 1997, 1998 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)