SAFETY INSTRUCTIONS
6. Cutting equipment
7. Quick-release
This section describes how through correct maintenance and
through using the right type of cutting equipment you can:
• Check that the harness
straps are correctly
•
•
•
Reduce the machine‘s tendency to kickback
Obtain maximum cutting capacity.
Increase the service life of the cutting equipment.
positioned. When the
harness and machine are
adjusted, check the harness‘
safety release catch to
ensure it works correctly.
Four basic rules:
1)Only
use the cutting
and guard equipment
we recommend! See
chapter “Technical
data“.
8.
Locking nut
•
Protect your hand from
injury when assembling,
use the blade guard as
protection when tightening
with a socket spanner.
Tighten the nut by turning
against the direction of
rotation. Loosen the nut by
turning in the direction of
rotation. (NOTE! the nut
has a left-hand thread).
2)Keep
well and correctly
the blade‘s teeth
sharpened! Follow our
instructions and use the
recommended filing
gauge. An incorrectly
sharpened or damaged
blade increases the risk
of an accident.
•
Tighten the nut using a
socket spanner, 35 - 50
Nm (3.5 - 5 kpm).
3)Keep
the correct setting.
Follow our instructions
and use the
recommended setting
tool. An incorrectly set
blade increases the risk
of jamming and
NOTE!
The locking nut‘s nylon lock
must not be so worn that it
can be turned by hand. The
lock shall hold at least 1.5
Nm. The nut should be
replaced after it has been put
on approx. 10 times.
kickback.
!
WARNING!
Never use a machine with defective
safety equipment. The safety equipment
should be maintained as described in
this section. If your machine does not
meet any of these controls you should
contact your service workshop.
4)Check
the cutting
equipment with regard
to damage and crack
formation. Damaged
cutting equipment
should always be
replaced.
English –
7
| Categories | Chainsaw Manuals, Husqvarna Chainsaw Manuals |
|---|---|
| Tags | Husqvarna 225R, Husqvarna 225RD, Husqvarna 225RJ, Husqvarna 232R, Husqvarna 232RD, Husqvarna 235R |
| Model Year | 1995, 1996, 1997, 1998 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Product Brand | Husqvarna, Chainsaw |
| Document File Type | |
| Publisher | husqvarna.com |
| Wikipedia's Page | Husqvarna |
| Copyright | Attribution Non-commercial |
(0 votes, average: 0 out of 5)