2
1
1
3
2
4
m-2670
m-2628
Figure 6
Figure 8
1.
Trunnion
2.
Speed selector rod
1.
2.
Traction control lever
3.
Three to 4 inches (7.6 to
10.2 centimeters)
Approximately 5 inches
(12.7 centimeters)
4.
Install the speed selector rod into the selector arm, add
one flat washer on the rod, and secure it with a cotter
pin (Fig. 5).
4.
Handgrip
4.
5.
Move the speed selector (Fig. 14) into fifth gear.
Note: If the speed selector does not move into fifth gear or
does not meet your speed requirements, adjust the speed
selector. Refer to Adjusting the Speed Selector on page 20.
Slowly pull the snowthrower backward while slowly
pressing the traction control lever toward the handgrip.
Note: The adjustment is correct when the wheels stop
rolling backward and the distance between the top of
the handgrip and the bottom of the traction control lever
is 3 to 4 inches (7.6 to 10.2 centimeters) as shown in
Figure 8.
Installing the Traction Rod
1.
Slide the spring over the bottom of the upper traction
rod (Fig. 7).
6.
Adjust the flange locknut, if necessary, to obtain the
proper distance between the top of the handgrip and the
bottom of the traction control lever.
4
3
Installing the Auger/Impeller
Drive Control Linkage
2
1. Thread a flange nut (flange side down) onto the upper
control rod located on the right side of the handle
assembly (Fig. 9).
1
2
m-4039a
Figure 7
3
4
1.
2.
Flange locknut
Spring
3.
4.
Lower traction rod
Upper traction rod
1
2.
3.
Thread a flange locknut (flange side up) onto the
bottom of the upper traction rod below the spring
(Fig. 7).
5
Adjust the flange locknut up or down on the upper
traction rod until the distance between the top of the
handgrip and the bottom of the traction control lever is
approximately 5 inches (12.7 centimeters) as shown in
Figure 8.
m-2676
Figure 9
1.
2.
3.
Lower control rod
Upper control rod
Flange nut
4.
5.
Flange locknut
Lower link
10
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38053, Toro 521, Toro 824 Power Throw |
| Model Number | 38053 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999 |
| Product Name | 824 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 5 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 38053 824 Power Throw Snowblower Operators Manual, 2003 5.0 out of 5.0 based on 1 product reviews. the Toro 824 is a great little piece of machinery