•
Discharge Chute Control (Fig. 14)—Rotate the
discharge chute control clockwise to move the
discharge chute to the left; counterclockwise to move
the chute to the right.
1
•
•
Chute Deflector Handle (Fig. 14)—Move the deflector
handle forward to move the snow stream down; move it
rearward to move the snow stream up.
934
Fuel Shutoff Valve (Fig. 14)—Close the valve by
rotating it clockwise. Open the valve by rotating it
counterclockwise. Close the valve when you do not use
the snowthrower.
Figure 16
1.
Recoil starter
•
Ignition Switch (Fig. 15)—Insert the key before
starting the engine. To stop the engine, remove the key.
Removing the Carburetor
Heater Box
If40you_
F (4operate_C), removethe enginethe carburetorwhen the airheatertemperaturebox (Fig.is17).above
4
2
3
4
3
1
2
m–4034
5
1
Figure 15
6
1.
2.
Ignition switch
Choke
3.
4.
Throttle
Primer
m-2673
Figure 17
1.
2.
3.
Screw and lock washer
Spark-plug wire
Bolt
4.
5.
6.
Carburetor heater box
•
•
Choke (Fig. 15)—Rotate the choke clockwise to the
On position to start a cold engine. As engine warms up,
gradually rotate the choke counterclockwise to the Off
position.
Bolts
Screws
1.
Disconnect the wire from the spark plug and ensure that
the wire does not contact the plug (Fig. 17).
Throttle (Fig. 15)—Move the throttle upward to
increase the engine speed; move it downward to
decrease the engine speed. Move the throttle to the Stop
position to stop the engine.
2.
3.
4.
Remove the key from the ignition switch (Fig. 15).
Pull the choke knob off (Fig. 15).
•
•
Primer (Fig. 15)—Press the primer to pump a small
amount of gasoline into the engine for improved
cold-weather starting.
Remove the fasteners that secure the carburetor heater
box (Fig. 17).
Note: Install these fasteners in their holes for safe
keeping.
Recoil Starter (Fig. 16)—The recoil starter is on the
back side of the engine. Pull the recoil starter to start the
engine.
5. Lift the carburetor heater box up and away from the
engine.
6.
Disconnect the green ground wire clip under the throttle
(Fig. 18).
14
| Categories | Snow Blower Manuals, Toro Snow Blower |
|---|---|
| Tags | Toro 38053, Toro 521, Toro 824 Power Throw |
| Model Number | 38053 |
| Model Year | 2003 |
| Download File |
|
| Document Type | Operator's Manual |
| Language | English |
| Serial Number | 230000001 - 230999999 |
| Product Name | 824 Power Throw Snowthrower |
| Product Brand | Toro. Customer Service Representatives are available by phone:
Monday - Friday 7:30 a.m. to 9:00 p.m. (CDT) - Saturday 8:00 a.m. to 8:00 p.m. (CDT) - Sunday 10:00 a.m. to 8:00 p.m. (CDT)
Canada 1-888-225-4886 USA 1-888-384-9939, Snow Blower |
| Product Type | Snowthrower |
| Product Series | Snowthrower, Two Stage Intermediate Frame |
| Swath | 24 inch |
| Discharge | Two Stage |
| Engine Manufacturer | Tecumseh |
| Engine Motor Model # | HMSK80-155645W |
| Engine Motor Size | 8 hp |
| Engine Motor Type | 4 Cycle CARB2, EPA2 |
| Transmission Speed | 5 Forward/2 Reverse |
| Transmission Type | Friction Disc |
| Document File Type | |
| Publisher | toro.com |
| Wikipedia's Page | Toro Company |
| Copyright | Attribution Non-commercial |
(1 votes, average: 5 out of 5)
Lawn and Garden readers have rated Toro 38053 824 Power Throw Snowblower Operators Manual, 2003 5.0 out of 5.0 based on 1 product reviews. the Toro 824 is a great little piece of machinery